Motorola CP 140 Basic User's Manual - Page 9

Browse online or download pdf Basic User's Manual for Portable Radio Motorola CP 140. Motorola CP 140 16 pages. Uhf2 (438-470mhz)
Also for Motorola CP 140: User Manual (26 pages), Basic User's Manual (16 pages), Basic User's Manual (18 pages), Detailed Service Manual (28 pages), Cps/Tuner Installation Manual (6 pages), Service Information (46 pages), Service Information (46 pages)

Print Page

GETTING STARTED

BATTERY INFORMATION

Charging Your Battery

If a battery is new, or its charge level is very low, you

will need to charge it before you can use it. When

the battery level is low and the radio is in transmit

mode you will see the LED indicator flash red. Upon

release of the PTT button, you will hear an alert

tone.

Note: Batteries are shipped uncharged from the

factory. Always charge a new battery 14 to 16

hours before initial use, regardless of the

status indicated by the charger.

Desktop Charger

To Charge the Battery

Turn the radio off.

Place the battery, with or without the radio, in

the charger pocket.

•

The charger LED indicates the charging

progress.

LED color

No LED Indication

Battery inserted incorrectly

or battery not detected.

Single Green Flash

Successful charger

power-up.

Flashing Red

Battery unchargeable or not

making proper contact.

Red

Battery is charging.

Flashing Yellow

Battery in charger but

waiting to be charged. The

battery temperature may be

too hot or too cold. The

voltage may be lower than

the predetermined threshold

level for charging.

Flashing Green

Battery 90% (or more)

charged.

Green

Battery fully charged.

a Remove and replace the battery in the charger.

If the LED indicator continues to flash red,

consult your dealer.

b A standard battery may require 90 minutes to

charge to 90% capacity.

Status

English