Motorola CP040 Service Information - Page 9

Browse online or download pdf Service Information for Portable Radio Motorola CP040. Motorola CP040 46 pages. Commercial radios uhf1
Also for Motorola CP040: Detailed Service Manual (28 pages), Service Information (48 pages), User Manual (18 pages), Service Information (30 pages)

Motorola CP040 Service Information
1.0

Introduction

This Chapter provides a detailed theory of operation for the UHF1 circuits in the radio. Schematic
diagrams and board layout diagrams are included in Chapter 4 in this Section of the manual.
2.0
UHF (403-440MHz) Receiver
The UHF receiver covers the range of 403-440 MHz and provides switchable IF bandwidth for use
with 20/25/30 kHz or 12.5 kHz channel spacing systems. The receiver is divided into two major
blocks, as shown in Figure 2-1.
Front End
Back End
RX from
Antenna Switch
Preselector
RF
Filter
Amp
First LO
from Synthesizer
Recovered Audio
RSSI
Figure 2-1 UHF Receiver Block Diagram

THEORY OF OPERATION

Interstage
Crystal
Filter
1st Mixer
Inj Filter
6G
Ceramic
Resonator
Demodulator
12.5kHzFilter
Chapter 2
IF
Amp
Filter
BW_SEL
6E
Cer Fltr
Switching
4E