Motorola GP338 User Manual - Page 37

Browse online or download pdf User Manual for Portable Radio Motorola GP338. Motorola GP338 44 pages. Professional two-way radio
Also for Motorola GP338: Instruction Booklet (4 pages), Instruction Booklet (4 pages), User Manual (40 pages)

Print Page

Method

Steps to Take

1. Press and release the pro-

grammed Speed Dial button.

2. Press the numbered keys

(1-9) corresponding to the Þrst

nine phone numbers in the

Speed

phone list. Press Ò0Ó if you want

Dial à

the last number dialed.

3. If your radio uses buffered dial,

press and release the PTT.

4. The radio sends out the phone

number.

The method described is not applicable for radios which

manually send the access code; these radios can access

this number from the phone list or the speed dial.

For radios that manually send the access code, press the

Down Key once to access the last number dialed.

For radios with keypad only.

Sending a New Number (for radios

with keypad only)

You enter the phone number by pressing the

relevant keys on the keypad.

www.segalnovin.com

Method

Live Dial

Buffered

Dial

NOTE: The radio starts a programmable Time-Out-

Steps to Take

Enter the phone number by using the

keypad; the radio sends out the numbers

as the keys are pressed.

1. Enter the phone number by using

the keypad; the radio saves the

selected numbers in a buffer.

2. Press and release the PTT; the

radio sends out the numbers in its

buffer.

The Phone Conversation

Once the radio has connected to the intended

party, you can begin the conversation. Even

though this is a phone call, your conversation

mimics a radio call (that is, both parties speak in

turn).

Press and hold the PTT, while talking into the

microphone.

Release the PTT when you Þnish what you

want to say, and wait for the response.

Repeat steps 1 and 2 until the conversation

ends.

Timer the moment both parties stop transmitting

(talking). If the Time-Out-Timer expires, the radio

will end the phone call.

Phone

English