Epson LABELWORKS PX User Manual

Browse online or download pdf User Manual for Label Maker Epson LABELWORKS PX. Epson LABELWORKS PX 4 pages.
Also for Epson LABELWORKS PX: Operator's Manual (14 pages)

Print Page

LABELWORKS PX

LW-PX750

User's Guide

Ver.01

Read this document carefully to use this product

safely and correctly. If your product is faulty, please

read the included warranty card and contact the

store you purchased it from. If you require further

assistance, contact your local K-Sun customer

support center.

Please also visit us at http://labelworks.epson.com

for help and support. You can download the latest

version of this User's Guide from the website.

International ENERGY STAR® Compliance

Statement

The purpose of the International ENERGY STAR®

Program is to promote the development and

popularization of energy-e cient o ce equipment.

As an ENERGY STAR® Partner; Seiko Epson

Corporation has determined that this product meets

the ENERGY STAR® guidelines for energy e ciency.

Safety Instructions

For your safety, read the attached documents carefully to use this product

correctly. After you have read all instructions, keep this manual handy for

future reference and to make your concerns clear.

Items below indicate safety precautions to protect users, their surroundings

and their property from possible injury or damage.

Meaning of the symbols

This indicates an important reminder.

This indicates a prohibited item.

This indicates a mandatory procedure.

DANGER

When handling batteries

If any liquid from the battery gets into your eyes, promptly wash it

out with clean water for more than 10 minutes and consult your

doctor at once. If you do not, the liquid may cause loss of eyesight.

Never disassemble or modify the battery. This may cause re,

explosion, leakage, overheating or damage.

Do not expose the battery to re or heat it. This may cause re,

explosion, leakage, overheating or damage.

WARNING

When using the AC adapter and power cable

The cords included with this product contain chemicals, including

lead, known to the State of California to cause birth defects or other

reproductive harm. Wash hands after handling. (This notice is

provided in accordance with Proposition 65 in Cal. Health & Safety

Code §25249.5 and following.)

Do not use any AC adapter or power cable other than the dedicated

AC adapter and power cable. Do not use the AC adapter with other

than the speci ed voltage also. Otherwise, damage, overheating,

re or electric shock may occur.

Take the following precautions when handling the AC adapter and

power cable.

• Make sure to avoid using multi-socket adapters.

• Make sure the plug is not dusty before inserting it into an outlet.

• Insert the plug rmly into the outlet.

• Do not hold the AC adapter or the plug with wet hands.

• Do not pull the power cable when disconnecting the plug. Be sure

to hold the plug when disconnecting it.

• Do not make any modi cation to the AC adapter or power cable.

• Do not apply strong shocks to or put a heavy object on the AC

adapter or power cable.

• Do not bend or twist the AC adapter or power cable forcibly.

• Do not place the AC adapter or power cable near a heater.

Do not use any damaged AC adapter or power cable. Otherwise,

damage, overheating or smoking may occur, which may result in re

or electric shock.

Do not touch the plug during thunderstorms.

When handling batteries

Keep the battery away from re or ame if it produces a strange

odor or leakage. Otherwise re or explosion may occur.

Should any battery liquid get on skin or clothing, promptly wash it

o with clean water. If you do not, the liquid may damage your skin.

Do not expose the battery to water. Do not allow water to contact

the terminals. This may cause re, overheating, or electric shock.

Keep batteries out of reach of children. They are extremely

dangerous if swallowed. Contact a doctor immediately if swallowed.

When using this product

Do not apply any strong force or shocks to the product such as

standing on, dropping or hitting it. Otherwise, the product may be

broken, which may result in re or electric shock. If it is damaged,

turn o the power immediately, unplug the AC adapter and remove

the batteries, and then contact the K-Sun customer support center.

Continuous use may result in re or electric shock.

Take care not to spill any beverage such as tea, co ee or juice onto

the product, or to spray aerosol insecticide. It may cause

malfunction, re, or electric shock. If any liquid has been spilled on

the product, turn o the power, unplug the AC adapter and remove

the batteries immediately, and then contact the K-Sun customer

support center. Continuous use may result in re or electric shock.

Notation used in this manual

Handling the product improperly by ignoring

DANGER

this symbol can result in immediate danger of

death or serious injury.

Handling the product improperly by ignoring

WARNING

this symbol can lead to death or serious

injury.

Handling the product improperly by ignoring

CAUTION

this symbol can lead to injury and property

damage.

Attention

Important information.

MEMO

Supplementary note

Reference page in this manual.

Example of label artwork.

Buttons on the product.

Menus and messages shown on the display,

"Name"

and manual names are enclosed in double

quotes.

Do not touch the printhead because it becomes very hot.

Otherwise, there is a risk of burns.

Do not open any covers other than the top cover or battery cover.

Doing so may result in re or electric shock. Always use the product

as instructed in this manual. Otherwise, damage or injury may occur.

Never modify or disassemble this product. Doing so may cause re

or electric shock. Do not carry out any operations not described in

this manual, or the product may break or cause injury.

If any of the following abnormalities is observed, turn o the power

immediately, unplug the AC adapter and remove the batteries, and

then contact the K-Sun customer support center.

• If smoke, strange odors or unexpected noises come from the

product

• If liquid or foreign objects get inside the product

• If the product has been dropped or damaged

Do not touch the tape eject slot, during printing or when the auto

cutter is in operation. Otherwise there is a risk of injury.

When handling the PeelGuard®

When removing the PeelGuard tray, make sure to turn the power o .

If the product operates without the PeelGuard tray, injury or

damage may occur with the blade inside the product.

When cleaning the PeelGuard tray, do not touch the PeelGuard

blade, as there is a risk of injury. Do not insert anything other than

labels into the tape insertion slot. Otherwise, damage to the

PeelGuard may occur.

When handling the auto cutter

Do not touch the tape outlet slot (where the labels come out)

during printing or when the auto cutter is in operation. Otherwise,

there is a risk of injury.

Others

Do not use or store the product, batteries, AC adapter, power cable,

or tape cartridges in the following places.

• In direct sunlight.

• Where it may become extremely hot such as in a vehicle with the

windows closed.

• Where it may become extremely hot such as near a heater or the

temperature becomes very unstable such as near the exhaust duct of

an air conditioner.

• Where the product may get wet due to a shower or rain such as in

a bathroom or outdoors.

• In a dusty place or where the product may be exposed to smoke

or steam such as near the kitchen or a humidi er.

• On an unstable place such as on a shaky table or on an inclined place.

• Where it might be subjected to vibration or shock.

• Near high-voltage power lines or something that generates a

magnetic eld.

Keep the plastic bags used to contain the product or this manual

out of reach of children. Children may su ocate if they swallow

them or put their heads into the bags.

CAUTION

When handling batteries

If liquid leaks from a battery, wipe it o with a cloth and replace it

with a new one. If the liquid comes in contact with your skin, wash it

away with water immediately.

If the batteries are used incorrectly, they may cause leakage,

overheating, explosion, erosion, or damage to the product, which may

result in re or injury.

• Do not use new ones and old batteries together, or mix di erent types of

batteries.

• Use AA alkaline batteries.

• Use batteries in the correct directions.

• Take the batteries out immediately when they have no power

remaining.

• Take the batteries out if you do not use the product for a long

time.

• Do not heat batteries or throw them in re or water.

• Do not pinch the batteries with metal tweezers or use any pointed

sharp metal object such as the tip of a mechanical pen or ball-

point pen when taking the batteries out.

When disposing of used batteries, make sure to follow the

regulations.

Included Items

The included items di er depending on the type of product package you purchased. Use the following table to check the items.

If you would like to purchase an item that is not included or have purchased a package other than one in the following table, see

the separate sheet included with the product.

No.

Included item name

LW-PX750

AC adapter

PX tape cartridge

USB cable

Label Editor Professional CD-ROM

Documents *

* You can download LW-PX750 User's Guide (PDF version) from http://labelworks.epson.com.

Speci cations

Body

Dimensions Approx. 193 (W) x 238 (D) x 66 (H) (mm)

Weight

Approx. 1,015 g (excluding batteries, tape cartridge)

Usage conditions

Operating temperature

5 to 35 degrees C

Storage temperature

-10 to 55 degrees C

Supported tape width

4 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm

Power supply

Battery

AA alkaline battery x 6

Rated time when using alkaline batteries

Rated operating time / Rated resting time

0.5h / 1.0h

When using the AC adapter

Do not unplug the AC adapter while the product is in operation,

otherwise printing may not be successful.

Do not use the AC adapter in a small, con ned space, or cover it

with a cloth. Otherwise, the AC adapter may overheat and

deteriorate.

When using this product

Do not stand or put anything heavy on the product or place it on an

unstable place such as on a shaky table or on an incline. Otherwise,

the product may fall and cause injury.

To ensure safety, unplug this product before leaving it unused.

Before cleaning, make sure to unplug the AC adapter from the

outlet, and remove the batteries.

Do not use a moistened cloth or solvents such as alcohol, thinner or

benzine.

Do not block or insert objects into the supplied AC adapter socket

or the tape eject slot.

When handling tape cartridges

• Make sure to use a dedicated PX Tape.

• Some types of tape cannot be cut by the cutter. For the details, refer to

the tape's manual.

• Do not drop it or disassemble it. Doing so may cause damage.

• Do not pull out the tape forcibly by hand. But make sure to feed the tape

with

. Otherwise, the tape cartridge may be broken and unusable.

• Avoid using a tape cartridge without remaining tape. Doing so may

cause overheating of the printhead, which may result in damage or

malfunction.

MEMO

Tape cartridges contain ink ribbons in them. When disposing of tape

cartridges, make sure to follow the local regulations for disposal.

Other cautions

Notes on usage

• Do not touch the thermal head. Static electricity may damage the

thermal head.

• Do not plug in and unplug the AC adapter while printing. Power may be

cut o .

• Operate the keyboard gently.

• Take care not to cut your ngers when cutting the label with scissors.

• Do not attach a label on human bodies, living things, public facilities or

other people's belongings.

• Be sure to turn the power o after use.

• Powering o message is displayed while turning o the product. Do not

remove the AC adapter until the message disappears.

• Be sure to replace batteries with the power turned o . If you replace the

batteries while the product is powered, les or data stored on it may be

deleted.

About the Symbols on this Product

On this product, the following symbols are used in order to ensure safety

and proper use of the product, and to prevent danger to users and other

persons as well as property damage.

The symbols indicate the meanings listed below. Be sure that you

completely understand the meaning of the symbols on this product before

using it.

On/Stand-by

Direct current

Hot surface

Polarity of D.C. power connector

Package name

LW-PX750 Full kit

LW-PX750 Lite kit

AC adapter

Type

AST1116Z2-1

Manufacturer

Seiko Epson Corp.

Input

AC100-240V, 0.4A, 50-60Hz

(dedicated adapter, power cable only)

Output

DC11V, 1.64A

Total output power

18 W

Troubleshooting

Messages

This section explains the remedies when the following messages

appear on the display.

Check battery

The batteries run out. Turn o the power and

Change alkaline

replace all batteries with new ones.

Cover open!

Top cover is open. Close the top cover.

Insert tape

Check if the tape cartridge is loaded or correctly

set.

For details,

"Installing a tape cartridge"

Check tape

The loaded tape is not supported. Insert a

cartridge

correct cartridge.

No more

Only up to 2 sequence numbers can be inserted.

sequence No.!

No more barcode! Only up to 2 barcodes can be inserted.

QR CODE too big! Perform either of the following:

Use a wider tape. Reduce the text or cell size.

Lower "ECC Level".

Overheated!

The printhead is overheated. Turn o the power

and remove the tape cartridge, then leave the

printer until it cools down.

Trash at slot

Tape remains in the tape eject slot. Remove the

Remove trash

tape.

Remove cut tape

Unable to start printing because cut tape

remains in the tape eject slot. Remove the tape

from the tape eject slot.

Problem

Unable to detect the tape correctly

Is the tape cartridge correctly installed?

Check that the tape cartridge is correctly installed.

Is the label for detecting the tape cartridge clean?

If not, wipe the dirt o with a soft cloth.

Is the detection sensor of the printer clean?

If not, wipe the dirt o with a soft cloth.

MEMO

If none of the above has solved the problem or the symptom is

other than the above, contact the K-Sun customer support center.