Epson ProofPlus TM-H6000III Manual - Page 3
Browse online or download pdf Manual for Label Maker Epson ProofPlus TM-H6000III. Epson ProofPlus TM-H6000III 10 pages. Ecc printer
Also for Epson ProofPlus TM-H6000III: Brochure (2 pages), Specifications (2 pages), Brochure (6 pages)
Print Page
We commonly use the following 'Null Modem' arrangement with good results:
Tip: If unsure on which cable to use, first try a standard Null Modem cable.
Getting Initial Printer and Connect-it Adapter Settings - the Self Test
Print the initial settings of the serial adapter by running the self test. Run the printer self test
by holding down the feed button while turning on the printer. The printer will print a list of
initial settings including baud rate, data bits, parity, stop bit, flow control (handshaking).
These values will be needed when configuring the serial port in Windows.
Configuring the Computer
Check the POS application to determine what the port settings should be on the computer.
The POS application and the printer must have the same baud rate, data bits, parity, stop bit
for the printer to print legibly. Also the handshaking must be set the same for the printer to
print at all.
D-Sub 25 (TM)
2 TxD connected to 2 RxD
3 RxD connected to 3 TxD
20 DTR connected to 6 DSR
20 DTR connected to 8 CTS
6 DSR connected to 4 DTR
7 GD connected to 5 GD
D-Sub 9(PC)