Motorola H710 - Headset - Over-the-ear Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Headsets Motorola H710 - Headset - Over-the-ear. Motorola H710 - Headset - Over-the-ear 6 pages. Bluetooth handsfree headset
Also for Motorola H710 - Headset - Over-the-ear: Quick Start Manual (1 pages), Quick Start Manual (2 pages)
Print Page
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Open the headset boom to power on the
headset and initiate pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809520A03-O
Bluetooth QD ID: B013079
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
3
PA
Your Heads
AIR
set and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1
On your Motorola phone, press
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select Motorola H710.
3
Select OK or Yes to pair your headset with
your phone.
4
Enter the passkey: 0000
5
Select OK.
When your headset successfully pairs with
your phone, the indicator light flashes
purple and blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls. To confirm they
are operating properly, make a call:
1
Place the headset over your ear.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
3
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To conserve power, close the boom to turn your
headset off. Re-open the boom to make a call.
M
Menu
>
(
)