Motorola HS830 - Wireless Pendant Headset Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Headsets Motorola HS830 - Wireless Pendant Headset. Motorola HS830 - Wireless Pendant Headset 2 pages. Bluetooth wireless module
Print Page
To turn on the wireless module, press and
HS830
hold the Call E button on your module until
the indicator light begins flashing. The
Bluetooth®
indicator light blinks when the power is on.
Wireless Module
To turn off the wireless module, press and
hold the Call E button on your module for 5
seconds. The indicator light will flash rapidly
and then stop flashing.
IMPORTANT:
IMPORTANT:
Be sure to first follow the
Be sure to first follow the
Quick Start Guide
Quick Start Guide
on the reverse side to
on the reverse side to
complete initial setup of
complete initial setup of
your HS830.
your HS830.
The indicator light provides information about
your wireless module status.
Indicator Light
On (steady)
Off
Indicator Light
Off
On (steady)
10 rapid flashes
Slow pulse
Quick flash
Note: After 5 minutes of inactivity, the indicator light stops
flashing to conserve power, but the headset remains in
standby mode.
TURNING ON
AND OFF
To adjust the volume on your wireless
module, press the Volume Up or Volume
Down button until you reach the desired
volume level.
Volume
Button
Indicator
Light
Call Button
When increasing (or decreasing) volume, a
single audio tone is heard when reaching
maximum (or minimum) level.
INDICATOR LIGHTS
Audio Tone
Single high tone when
With the Charger Plugged In
pressing volume button
Module Status
Five rapid high tones
repeated every 60 sec.
Charging
No audio indications;
Charging complete
deteriorating quality
With No Charger Plugged In
Series of 4 tones
(low to high)
Module Status
Ring tone
Power off
Single high tone
Pairing mode
Single low tone
Pairing successful
Dual high/low tone
Connected
(on a call)
Single high tone
Standby
Series of 4 tones
(not on call)
(high to low)
ADJUSTING VOLUME
Volume
Up
Down
Button
AUDIO TONES
Module Status
Volume at minimum
or maximum
Low battery
Out of range
Call active
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Audio link closed
(headset mode)
Call ended
(handsfree mode)
MAKING CALLS
Function
Action
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Receive a call
Tap the Call button
End a call
Tap the Call button
Reject a call
Press and hold the
Call button until you
hear a beep
Redial last call
Press and hold the
Call button until you
hear a beep
Mute a call
Press and hold both
Volume buttons
until you hear a beep.
Unmute a call
Press either Volume
button
Transfer a call from the
Tap the Call button
phone to the module
AUDIO TONES
CONTINUED
Audio Tone
Module Status
Fast high/low
No
tone every
network/service
5 seconds (max.
& min. volume
confirm beep)
No tone
Power off
The wireless module sounds an audible alert
so that you do not miss an incoming call even
if your phone is in a bag or briefcase. The
audible alert can be turned on or off by
pressing and holding both Volume buttons for
3 seconds.
Note: Disabling the audible alert does not affect the
phone or earbud operation. Alerts will still be heard in the
earbud speaker if the phone is set to other than silent
mode.
MAKING CALLS
CONTINUED
Function
Action
Answer a second
Press and hold the
incoming call
Call button (places
first call on hold)
Toggle between two
Press and hold
active calls
the Call button
Join a 3-way call
Press and hold
(Note: Feature is phone/
both Volume
network dependent.)
buttons
Put an active call on
Press and hold the
hold or resume a call
Call button until you
on hold
hear a beep
Note: Your HS830 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
OTHER WIRELESS MODULE
APPLICATIONS
The wireless module can also be used as a
handsfree device on a helmet. The Motorola
SYN0997 Universal Helmet Adapter mounts
to almost any helmet - motorcycle/scooter,
skiing, snowboarding. The wireless module
slides into the helmet adapter creating a
handsfree accessory for your helmet.
Two wireless modules can also be configured
for full-duplex voice communication with each
other. For example, a motorcycle driver may
communicate wirelessly with a rider sitting
behind.
For details on these applications, see the
HS830 Helmet Adapter User's Guide.