Motorola Noise-com ENMN4010 Manual - Page 4

Browse online or download pdf Manual for Headsets Motorola Noise-com ENMN4010. Motorola Noise-com ENMN4010 32 pages.

Print Page

OPERATION

There are two modes of noise-com operation:

•

VOX or Hands Free Operation - to

communicate the user simply speaks into the

noise-com microphone, Fig. 1 (3),

the noise-com push-to-talk (PTT) button,

Fig. 1 (4) is not used.

•

Push To Talk (PTT) Operation - to

communicate the user presses the

noise-com push-to-talk (PTT) button,

Fig. 1 (4), whilst speaking into the noise-com

microphone, Fig. 1 (3).

VOX or Hands Free Operation:

Ensure that the radio has been already

programmed to enable VOX operation using the

dealer radio programming software.

1. Always switch the radio OFF before

connecting the noise-com unit.

2. Attach the audio connector to the radio taking

care not to over tighten the fixing screw.

3. Press and hold down the noise-com PTT

button, Fig. 1 (4) and switch the radio ON -

care should be taken not to set the volume

level too loud.

4. Continue to hold down the noise-com PTT

button until the green radio light (LED) is

extinguished - release the noise-com PTT

button. The green radio light (LED) is

situated on top of the radio.

5. Speak into the noise-com microphone,

Fig. 1 (3), to check that the two-way

communication is working.

6. Adjust the noise-com speaker audio level

using the radio volume control.

7. Always switch the radio OFF before removing

the noise-com unit.