Epson TM-T20 User Manual - Page 11
Browse online or download pdf User Manual for Label Maker Epson TM-T20. Epson TM-T20 20 pages. Esc/pos
Also for Epson TM-T20: Brochure (2 pages), Datasheet (2 pages), Instructions For Installing (9 pages), Setup Manual (2 pages), Quick Reference Manual (4 pages), Setup Manual (2 pages)
Print Page
Hanging the Printer on a Wall
To hang the printer on the wall, follow the steps below.
CAUTION:
To fix the printer securely, install the wall hanging bracket on a wall made of
wood, concrete, or metal. The thickness of the wall should be 10 mm {0.4"} or
more.
Be sure to use metallic screws.
The screws on the wall side must have a pull-out strength of 150 N (15.3 kgf) or
more.
1.
Install 2 screws (screw diameter: 4 mm {0.16"}, head diameter: 7 to 9 mm {0.28
to 0.35"}) in the wall at an interval of 80 mm {3.15"}. Make sure the length of
the screw's body in the wall is 10 mm {0.39"} or more, and the length outside
the wall is 3 to 4 mm {0.12 to 0.16"}.
2.
Remove the installed 2 screws from the printer, as shown in the illustration
below.
3.
Install the wall hanging bracket on the printer, and fix it using the screws
removed in Step 2.
7~ 9 mm
80 mm
Screws
3~ 4 mm
4 mm
10 mm or more
TM-T20 User's Manual 11
English
Wall hanging
bracket