Epson TM-T81 User Manual - Page 9
Browse online or download pdf User Manual for Label Maker Epson TM-T81. Epson TM-T81 13 pages.
Also for Epson TM-T81: User Manual (20 pages)
Print Page
Cleaning the Thermal Head
CAUTION:
After printing, the thermal head can be very hot. Do not touch it and let it cool
before you clean it. Do not damage the thermal head by touching it with your
fingers or any hard object.
Turn off the printer and open the printer cover. As shown in the illustration
below, clean the thermal elements of the thermal head with a cotton swab
moistened with an alcohol solvent (ethanol or isopropyl alcohol).
Autocutter blade
Epson recommends cleaning the thermal head periodically (generally every
3 months) to maintain good print quality.
Setting the DIP Switches
Be sure to turn off the printer before
removing the DIP switch cover. If you
remove it when the printer is turned
on, the printer may be damaged
because of fire or electric shock.
1.
Make sure the printer is turned
off, and turn over the printer.
2.
Remove the DIP switch cover on
the bottom of the printer by
removing the screw as shown in
the illustration.
3.
Set the DIP switch settings with a
sharp-pointed object.
4.
Install the DIP switch cover, and
tighten the screw.
The new settings become effective
after the printer is turned on.
Thermal head
English
DIP switch cover
DSW1
Bottom of
the printer
TM-T81 User's Manual 9
DSW2