Epson 1280 - Stylus Photo Color Inkjet Printer Product Information - Page 11

Browse online or download pdf Product Information for Software Epson 1280 - Stylus Photo Color Inkjet Printer. Epson 1280 - Stylus Photo Color Inkjet Printer 13 pages. Product support bulletin(s)
Also for Epson 1280 - Stylus Photo Color Inkjet Printer: Cartridges Replacement (2 pages), Product Support Bulletin (6 pages), Product Support Bulletin (1 pages), Supplementary Manual (1 pages), User Manual (27 pages), Compatibility Manual (1 pages), Supplementary Manual (2 pages), Start Here (2 pages), Brochure & Specs (2 pages), Start Here Manual (6 pages), Specifications (2 pages), User Manual (12 pages), Product Support Bulletin (3 pages), Product Support Bulletin (2 pages), Product Support Bulletin (4 pages), Product Support Bulletin (7 pages), Getting Started Manual (32 pages), Installation Instructions Manual (8 pages)

Print Page

Epson 1280 - Stylus Photo Color Inkjet Printer Product Information

2. Press the b maintenance button and hold it down for three

seconds. Cleaning takes about 30 seconds, during which the

printer makes some noise and the Ppower light flashes.

Never turn off the printer while the Ppower light is

flashing, unless the printer hasn't moved or made noise

for more than 5 minutes.

3. After the Ppower light stops flashing, do one of the

following:

If your printer is connected directly to the computer, go

to step 4 to run a nozzle check.

If you're printing over a network, open an application and

print a short document containing black and color data.

Check the quality of your printout, then go to step 8.

4. If you have an application running, access the printer

settings dialog box.

Or, with Windows, click

select

. Right-click your

Printers

printer icon in the Printers window. Then select

1280

(

Properties

Document Defaults

5. Windows: Click the

Utility

Macintosh: Click the

6. Make sure paper is loaded in the printer, click the

button, and click

Check

prints. (See the next section for details.)

7. If the nozzle check pattern has no gaps in its dots, click

Finish

If the pattern is missing dots, click

head again.

8. If you don't see any improvement after cleaning three or

four times, check the solutions in the Printer Basics book.

You can also turn the printer off and wait overnight—this

allows any dried ink to soften—and then try cleaning the

print head again.

, point to

, then

Start

Settings

EPSON Stylus Photo

in Windows NT).

tab.

Utility button.

Nozzle

. The nozzle check pattern

to clean the print

Clean

Examining the Nozzle Check Pattern

Examine the nozzle check pattern you print. It should look

something like this:

Each staggered horizontal and straight vertical line should be

complete, with no gaps in the dot pattern. If your printout

looks okay, you're done. If any dots are missing, as shown

below, clean the print head again; see page 10 for instructions.

missing dots

Aligning the Print Head

If your printouts contain misaligned vertical lines, you may

need to align the print head. Your printer must be connected

to a local port, not on a network, to use the Print Head

Alignment utility. Follow these steps:

1. Make sure the printer is turned on but not printing, and

letter-size paper is loaded.

Load letter or A4-size paper to print the entire

bidirectional pattern.

For the best results, load EPSON ink jet paper in the

printer whenever you check the print head alignment.

2. If you have an application running, access the printer

settings dialog box.

Or, with Windows, click

select

. Right-click the

Printers

icon in the Printers window. Select

in Windows NT).

Defaults

3. Windows: Click the

Macintosh: Click the

4. You see the Utility menu. Click the

button.

5. Follow the instructions on the screen to print a test page.

6. Select the best line from the first group of lines on the

printout, then enter its number in box #1 on screen. Select

the line with the cleanest, straightest edges. Then choose the

best line in the second group and enter its number in box #2

on screen.

1/01

EPSON Stylus Photo 1280

missing dots

, point to

Start

Settings

EPSON Stylus Photo 1280

(

Properties

Document

tab.

Utility

Utility button.

Print Head Alignment

EPSON Stylus Photo 1280

, then

- 11