Epson 1715C - PowerLite XGA LCD Projector Quick Setup - Page 3

Browse online or download pdf Quick Setup for Software Epson 1715C - PowerLite XGA LCD Projector. Epson 1715C - PowerLite XGA LCD Projector 4 pages. Remote control information
Also for Epson 1715C - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Operation Manual (47 pages), Installation Manual (19 pages), User Manual (1 pages), Parts List (1 pages), Documentation Update (12 pages), Function Manual (5 pages), Software Manual (2 pages), Product Support Bulletin (25 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Specifications (2 pages), Installation Handbook (8 pages)

Print Page
Epson 1715C - PowerLite XGA LCD Projector Quick Setup
4
I f you see a blank screen or you don't see the image you are trying
to project from your computer, make sure the Power light on the
projector is green and not flashing, and the A/V Mute slide is open.
If the screen is still blank, restart your notebook, or press the Source
Search button on the projector again.
Windows
®
: Hold down the Fn button on the keyboard and press the
function key that lets you display on an external monitor. It may have
an icon such as
5
I f your projector and notebook don't display the same image, do
the following:
Windows: Try using the CRT/LCD or
above. If this doesn't work, double-click Display in the Windows
Control Panel. Make sure both the LCD screen and monitor port are
enabled. (Allow a few seconds for the projector to sync up.) See your
Windows online help for details.
Macintosh
®
Preferences, then click Displays. Select the VGA Display or Color
LCD dialog box, click the Arrangement (or Arrange) tab, and make
sure Mirror Displays is checked.
6
I f you see an image but it's not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11g, 802.11b, or
802.11a wireless network from a computer running Windows 2000, XP, or
Macintosh OS X 10.3 or above.
NOTE:
You must have already installed the projector's EasyMP (EMP NS
Connection) software and configured your projector and computer. See
the User's Guide for instructions. Also, your computer must have a
wireless card or built-in wireless connection.
1
I nstall the wireless module. If necessary,
secure it with the screw included with
your projector.
2
T urn on the projector and adjust the
image as described in sections 1 and 2
on the front of this sheet.
3
S elect EasyMP as the source by
pressing the EasyMP button on the
remote control.
The projector displays a screen like this:
4
W indows:
From the Start menu, select EMP NS Connection.
M acintosh OS X:
Applications folder.
You see this screen:
, or it may be labeled CRT/LCD.
OS X:
From the Apple
Double-click the EMP NS Connection icon in your
function key, as described
menu, select System
®