Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer Getting Started Manual - Page 8

Browse online or download pdf Getting Started Manual for Software Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer. Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer 10 pages. Ink fill for the refillable cartridge system
Also for Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer: Installation Manual (4 pages), Use Instructions (5 pages)

Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer Getting Started Manual
6. Make sure the
selected and
is unchecked. Then click
printer
7. Click
Create a new port
.
Next
8. When you see the Add Standard TCP/IP Print Port Wizard screen,
click
.
Next
9. Enter the IP address for the Macintosh that is running the ColorBurst
RIP server (located under
then click
Next
Note: The IP address on the Macintosh ColorBurst server must be static.
10. Select
Custom
11. Under Protocol, select
12. For the Queue Name, enter the exact ColorBurst Print Server Name
that appears in the Macintosh RIP server's ColorBurst RIP Preferences
window.
The name is case-sensitive; the default name is
13. Make sure the
14. Click
.
OK
15. Click
.
Next
Local printer attached to this computer
Automatically detect and install my Plug and Play
, select
System Preferences > Network settings
.
, then click the
LPR.
LPR Byte Counting Enabled
.
Next
Standard TCP/IP Port
button.
Settings
checkbox is unchecked.
7
button is
, and click
ColorBurst_RIP
),
.