Epson 755c - PowerLite XGA LCD Projector Operation Manual - Page 9

Browse online or download pdf Operation Manual for Software Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 47 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 755c - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Specification Sheet (2 pages), Parts Manual (26 pages), Product Support Bulletin (30 pages), User Replaceable Items (1 pages), Quick Setup (2 pages), Installation Manual (19 pages), User Manual (1 pages), Function Manual (5 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page
Epson 755c - PowerLite XGA LCD Projector Operation Manual
Installing EasyMP Monitor
C
From here, continue with the installation by following the
on-screen messages.
Limitations imposed by a Windows Vista or
Windows 7 environment
When using EasyMP Monitor under Windows Vista or Windows 7, note
the following limitations.
• You must have administrator authority in order to use Register at
startup on the Environment setup screen of EasyMP Monitor. s
• If EasyMP Monitor is installed on your computer, uninstall it before
you update the operating system to Windows Vista or Windows 7.
Updating your OS without uninstalling the software may cause a
malfunction. s
p.46

Before starting operations

Check the following points before starting up EasyMP Monitor.
• EasyMP Monitor must be installed on the computer to be used for
monitoring and control.
• The computer and the projectors must be connected to the network.
• If using Windows 2000/Windows NT4.0/Windows XP/Windows
Vista/Windows 7, the computer must be started up in Administrator
mode.
• Depending on the projector model, a commercially-available serial W
TCP/IP conversion adapter and a connection cable are required in
order to use EasyMP Monitor. s Projector's User's Guide
Make the settings for the serial W TCP/IP conversion adapter before
connecting to the projector.
p.27
9