Epson 7800 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual - Page 18

Browse online or download pdf Unpacking And Setup Manual for Software Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Also for Epson 7800 - Stylus Pro Color Inkjet Printer: Brochure & Specs (8 pages), Specifications (4 pages), Getting Started Manual (10 pages), User Manual (11 pages), Quick Reference Manual (12 pages), Supplementary Manual (1 pages), Limited Warranty (12 pages), Brochure & Specs (8 pages), Product Support Bulletin (10 pages), Brochure & Specs (16 pages), Notice Sheet (4 pages)

Print Page
Epson 7800 - Stylus Pro Color Inkjet Printer Unpacking And Setup Manual
❏ Each slot can hold a particular color of ink. Be sure
to install the ink cartridges in the correct slots
according to the ink mode you choose.
1 2 3 4
No.
EPSON Stylus Pro
9800/7800
#1
Light Light Black
#2
Light Magenta
#3
Light Cyan
#4
Light Black
#5
Matte Black or
Photo Black
#6
Cyan
#7
Magenta
#8
Yellow
1. Turn on the printer by pressing the Power
button. After a short time INSTALL INK
CARTRIDGE is displayed on the LCD panel.
18
5 6 7 8
EPSON Stylus Pro
9400/7400
Matte Black
Matte Black
Magenta
Magenta
Cyan
Cyan
Yellow
Yellow
2. Open the ink compartment cover, and make
sure that the ink lever is in the up position.
3. Remove the package from an ink cartridge.
c
Caution:
Do not shake cartridges (that have been
installed previously) with too much force.
4. Hold the ink cartridge with the arrow mark
facing up and pointing to the rear of the
printer, and then insert it in the slot until the
corresponding ink mark is displayed on the
LCD.
5. Repeat step 3 and 4 for the other ink cartridges.