Epson 7800 - Stylus Pro Color Inkjet Printer Quick Reference Manual - Page 7

Browse online or download pdf Quick Reference Manual for Software Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 12 pages. Stylus pro 800 series
Also for Epson 7800 - Stylus Pro Color Inkjet Printer: Unpacking And Setup Manual (27 pages), Brochure & Specs (8 pages), Specifications (4 pages), Getting Started Manual (10 pages), User Manual (11 pages), Supplementary Manual (1 pages), Limited Warranty (12 pages), Brochure & Specs (8 pages), Product Support Bulletin (10 pages), Brochure & Specs (16 pages), Notice Sheet (4 pages)

Print Page

Epson 7800 - Stylus Pro Color Inkjet Printer Quick Reference Manual

Replacing Ink Cartridges (continued)

Hold the cartridge with the arrow mark pointing

toward the printer. Then insert the cartridge into the

slot. Don't force it.

Note:

If you can't insert the cartridge smoothly,

you may have the wrong cartridge. Check the

package and product code. If the

on after installing the cartridge, try removing and

then reinserting it.

Replacing Printer Parts

Replacing the Printer Cutter Blade

If you notice that the paper isn't cut cleanly, you may need

to replace the cutter blade (part # C12C815291). You can

check its status as described below:

Press the Menu button on the printer, then press

until PRINTER STATUS is highlighted.

Press Menu, then press

highlighted.

Press Menu. The cutter service life is displayed.

E*****F indicates a new cutter. If no stars are

displayed, the cutter may need to be replaced.

Caution:

Cutting the following media may shorten

the cutter's life and is not recommended:

•

Fine art paper (such as Epson UltraSmooth™ ,

Textured, or Velvet)

•

Canvas

•

Backlight ﬁlm

•

Vinyl

Ink light remains

until SERVICE LIFE is

Return the ink lever to its locked position.

Close the ink compartment cover.

Follow these steps to replace the cutter:

Press the Menu button on the printer, then

until MAINTENANCE is highlighted.

press

Press the Menu button. CUTTER

REPLACEMENT is highlighted.

Press Menu to display EXECUTE, then press

The print head moves to the cutter replacement

position.

Open the front cover.

Continue