Philips 14PV284/05 Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for TV Philips 14PV284/05. Philips 14PV284/05 16 pages. Philips remote control operating instructions in brief
Also for Philips 14PV284/05: Operating Instructions Manual (12 pages)
Print Page
Programming with 'VIDEOPIus+'
How to enter, check or clear a TIMER
block manually
All the information required for programming is encoded in
the '\/IDE0Plus+' code.
0 Press the I sv | button on the remote control.
0 Enter the entire 'VIDEOPIus+ code'. This code (up to 9
digits) is found next to the start time of a TV programme
in your TV guide.
If you entered an incorrect code number, clear it with
the I CLEAR I button.
VIDEOPLUS
CODE
OAILY/WEEKLY
ONCE
PROGRAMME NR.
01
0-9
OK
0 If you want to repeat programming at daily or weekly
intervals, select the required setting in the 'DAlLYAAfEEK-
LY' line.
'Daily' programming can only be used for recordings to
be made from Mondays to Fridays inclusive.
0 After the confirmation the corresponding data appears
on the TV screen.
Note:
If you use 'VIDEOPIus+' for the first time, the
'PROGRAMME NR.' line appears when you enter the
'VIDEOPIUS+' code. Enter the required programme num¬
ber for this TV channel.
DATE DW PR START END
01
01 17:15 18:45
A V
0-9
OK
0 Confirm with the I
I button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase
protection.
0
Press the
I
timer
0 | button.
0
Select a free TIMER block or the TIMER block you want
to check or clear.
0
Clear: Press the
I
clear
| button.
0
Enter/Check: Press the
I
. ' I
J
or
I
► I button to switch
between 'DATE' (date), 'DW' (daily, weekly), 'PR' (pro¬
gramme number), 'START' (starttime) and 'END' (end
time).
_
Press the I
I and the I ▼ I, or the I o-9 I buttons to
change the data.
0
To end programming, press the I menu Ihnttnn.
0
Press the I
standby
<51 button.
Important notes for programmed recordings
•
If the message 'PLEASE PRESS STOP' or 'PLEASE PRESS
STANDBY' appears on the TV screen, press the
I
STOPB I or the I
standby
6 | button.
A TIMER recording will function only, if the set isn't used
for other video recorder functions (e.g.: playback).
•
The TIMER lamp on the front of the set lights up when
one or more of the TIMER blocks are occupied.
•
If the end of the cassette is reached during a recording,
the video recorder automatically ejects the cassette. The
set switches off after a few minutes.
•
If you forgetto load a cassette, 'NO CASSETTE CANNOT
RECORD' will appear.
•
If you inserted a cassette with erase protection when
you want to start a recording, the cassette will be
ejected.
•
If 'CODE ERROR' appears on the TV screen, you entered
an incorrect code number or the incorrect date. Repeat
the entry or end with the I
standby(51
button.
With 'Daily' programming, the first recording must take
place within a week.
•
If 'DAILY ERROR' appears on the TV screen, the date was
incorrectly entered. 'Daily' programming can only be
used for recordings to be made from Mondays to Fridays
inclusive.
•
The programmed recording will always be made at the
recording speed (SP/LP) that has already been selected
on the TV Combi.
0
Press the I standby^ button.