Epson 826W - PowerLite WXGA LCD Projector Quick Setup - Page 2

Browse online or download pdf Quick Setup for Software Epson 826W - PowerLite WXGA LCD Projector. Epson 826W - PowerLite WXGA LCD Projector 4 pages. Epson powerlite 85/825/826w
Also for Epson 826W - PowerLite WXGA LCD Projector: User Manual (42 pages), Specifications (6 pages), Operation Manual (47 pages), Quick Setup Manual (9 pages), User Manual (1 pages), Specifications (2 pages), Product Support Bulletin (25 pages), Product Support Bulletin (12 pages), Getting Started Manual (9 pages), Declaration Of Conformity (4 pages), Parts List (1 pages), Product Support Bulletin (22 pages), Parts List (1 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Installation Handbook (10 pages), Installation Handbook (3 pages)

Print Page
Epson 826W - PowerLite WXGA LCD Projector Quick Setup
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control.
Power light
Power button
The
power light flashes green, then stays on.
NOTE: To shut down the projector, press the
the two confirmation beeps, then unplug it. You don't have to wait for the
projector to cool down.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
power button twice, wait for
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
or
projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Change
presentation
slides (USB cable
connection only)
Navigate
projector
menus
You can use the remote control to operate the projector. With the USB cable,
you can use the remote as a wireless mouse. For more information on using
the remote control, see the User's Guide on your projector CD.
or
, you've placed the projector off to
, press the
or
buttons on the
Choose which
source to display
Open a menu item
assigned by the user
Control projector volume