Epson ActionNote 880C User Manual - Page 25
Browse online or download pdf User Manual for Software Epson ActionNote 880C. Epson ActionNote 880C 47 pages. Product support bulletin(s)
Also for Epson ActionNote 880C: User Manual (17 pages), Product Information Manual (11 pages), Product Support Bulletin (3 pages), Programming Instructions (1 pages)
Print Page
Network card configuration options
Option
Memory Address 1 *
Memory Address 2*
Base l/O Address*
IRQ Line*
Fast Token Ring Speed
* Do not change the displayed values for these options unless you have a
specific reason.
Once you have changed your configuration, make sure you
save the settings by selecting
screen. When you exit the Card Lite Configuration Utility (from
the File menu), the program prompts you to allow it to save the
changes to the CARDLITE.INI and CONFIG.SYS files.
Changing the Card Insertion Parameters
Normally, your system beeps when you insert or remove a
card or when you have a configuration conflict. When you
select the Beeps option from the Settings pull-down menu,
you see the Beep Settings configuration screen, which allows
you to specify beep criteria for your system.
Note
If you change these parameters, make sure you save the
settings by selecting
When you exit the CardLite Configuration Utility (from the
File menu), the program prompts you to save the changes to
the CARDLITE.INI and CONFIG.SYS files.
Function
Identifies the memory address for the first PC
card.
Identifies the memory address for the second
PC card.
Identifies the address used by the PC LAN cards.
Sets the IRQ line used by the PC LAN cards. This
can be a value between 0 and 15.
Enables Fast Token Ring Speed if your PC LAN
cards support it. Refer to your card
documentation for more information.
from the configuration
OK
from the configuration screen.
OK
Using CardLite
2 - 5