Epson EasyMP Monitor 4.53 Operation Manual - Page 18

Browse online or download pdf Operation Manual for Software Epson EasyMP Monitor 4.53. Epson EasyMP Monitor 4.53 48 pages. Operation guide - easymp monitor v4.53

Print Page

Registering and deleting projectors for monitoring

You can also carry out this operation by selecting New - Projector (manual

registration) from the Edit menu.

Enter the IP address of the projector to be registered in the

"IP address" box and then click "Search". When the message

is displayed, click "OK".

If you are using a serial W TCP/IP conversion adapter and cable to

connect the projector, select Use Serial W TCP/IP conversion

adaptor, enter the port number in Port Number, and then click

Search.

After searching is complete, enter the information for the

projector to be registered while referring to the table below.

Display name

Enter the name of the projector(s) to be displayed

in Grouping view or Detail list view. Up to a

maximum of 32 bytes can be entered. A space

cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in Grouping

view or Detail list view.

Parent group

Select when registering a projector in a group. If

no groups have been created, this cannot be

selected. (See the next section for more

information on registering projectors to a group.)

Projector

This shows the name that has been registered on

name

the projector.

IP address

This shows the IP address that you entered in step

Use Serial W

Select this if you are using a serial W TCP/IP

TCP/IP

conversion adapter to connect the projector.

conversion

adaptor.

Port Number

If you are using a serial W TCP/IP conversion

adapter to connect the projector, enter the port

number.

Monitor

If a Monitor Password has been set for the

Password

projector, be sure to enter the Monitor Password

that has been set. If the correct password is not

entered at this time, it will not be possible to

monitor and control the projector even though it

is registered. If you are using a serial W TCP/IP

conversion adapter to connect the projector, the

Monitor Password security function cannot be

used.

Description

You can enter a memo about the projector. The

details you enter here will be displayed at the

projector properties.

Up to a maximum of 60 bytes can be entered.

Monitor

Select this when you want monitoring to start.

After entering the details, click "Register" to start the

registration. When the message is displayed, click "OK".

The icon(s) of the projector(s) you registered will be displayed in

Grouping view or Detail list view.

Registering several projectors to a monitoring group

all at once

Projectors that have been registered can then be registered together into

different groups so that they can be monitored and controlled together.

Furthermore, if you select one of the registered groups as the Parent

group, monitoring and control operations can be carried out for all

projectors in that Parent group.