Epson EasyMP Multi PC Projection Operation Manual - Page 34
Browse online or download pdf Operation Manual for Software Epson EasyMP Multi PC Projection. Epson EasyMP Multi PC Projection 47 pages. Epson easymp multi pc projection operation guide
Also for Epson EasyMP Multi PC Projection: Operation Manual (48 pages), Operation Manual (49 pages), Operation Manual (46 pages)
Print Page
Solving Problems
Check
Are the computer's LAN card and the built-in LAN function
available?
Is the DHCP function for Wired LAN turned On?
Are connection denial functions, such as MAC Address
restrictions and port restrictions, set correctly at the
access point?
Are the IP address, the subnet mask, and the gateway
address for the access point and the projector set
correctly?
Cannot connect the projector and the computer via the network
Check
Is the Network Configuration screen displayed on the
projector?
Is the firewall turned off, or has the firewall been
registered as an exception?
Was the network adapter being used selected correctly
with EasyMP Multi PC Projection?
Are the access point and the projector's subnet different? Select Manual search from EasyMP Multi PC Projection, and then specify the IP address to connect.
Does the projector support the EasyMP Multi PC
Projection version being used?
Check that LAN is valid by checking the device manager under Control Panel - System - Hardware.
Turn off the DHCP setting for Wired LAN from the Configuration Menu.
See your projector User's Guide for details on the projector's wired LAN settings.
Set the projector to allow connections from the access point.
When not using a DHCP, adjust each setting.
Close network settings on the projector, and return to the LAN standby screen. If the Network
Configuration screen is displayed on the projector, you cannot connect using EasyMP Multi PC
Projection.
When you do not wish to turn off the firewall or register the firewall as an exception, make the
necessary settings to open the ports.
The ports used by EasyMP Multi PC Projection are "3620", "3621", and "3629".
If the computer has multiple LAN environments, it cannot connect unless the network adapter is
selected correctly. When using a computer running Windows, start EasyMP Multi PC Projection, and
select the network adapter you are using from Switch LAN in Set options.
s "General Settings Tab"
p.43
s "Manual search"
p.18
Install EasyMP Multi PC Projection from the EPSON Projector Software for Meeting & Presentation
CD-ROM supplied with the projector.
Remedy
Remedy
34