Epson EasyMP Network Projection Operation Manual - Page 10

Browse online or download pdf Operation Manual for Software Epson EasyMP Network Projection. Epson EasyMP Network Projection 47 pages. Multimedia projector
Also for Epson EasyMP Network Projection: Operation Manual (47 pages), Update Instructions (4 pages), Operation Manual (50 pages), Operation Manual (50 pages), Operation Manual (47 pages), Operation Manual (50 pages), Operation Manual (40 pages), Operation Manual (48 pages)

Print Page

Two Connection Modes

Preparing to Connect

Follow the steps below to connect the computer and the projector via a

network using EasyMP Network Projection.

Install EasyMP Network Projection on the computer to be

connected.

"Installing"

p.7

Make network settings on the computer and put it into network

connection status.

See the documentation supplied with your the computer, wireless

LAN adapter, or AirMac card for details on network settings.

When the computer you are using is normally connected to the

network, you do not need to make network settings on the

computer.

For Quick Connection Mode

Install the Wireless LAN unit to the projector (If already installed, go

to step 5).

For Advanced Connection Mode

Enable the wireless LAN adaptor at Port Configurations.

Computer's documentation

Make network settings on the projector and put it into network

connection status.

You can make network settings from the projector's Network menu.

See the following manual for details.

User's Guide "Network Menu (EB-1775W/EB-1770W/EB-1760W

Only)"

Press the [LAN] button on the remote control.

The LAN standby screen is displayed.

If there is no signal for the current input source, it automatically

switches to the LAN source. If it does not automatically switch to the

LAN source, press the [LAN] button.

Start EasyMP Network Projection on the computer and connect

with the projector.

"Connecting to a Projector on a Network and Projecting"

p.11

If a connection error occurs, a number indicating the type of error is

displayed as follows.

Event ID: 04xx

See the following manual for details on Event ID.

User's Guide "About Event ID (EB-1775W/EB-1770W/EB-1760W

Only)"