ECI CabLite ECO 5000K Installation Manual - Page 4

Browse online or download pdf Installation Manual for Light Fixture ECI CabLite ECO 5000K. ECI CabLite ECO 5000K 14 pages.

Print Page

Cablite ECO Installation Manual Rev 4.0

1 Introduction

This manual is intended for facilitate the installation of CabLite® ECO lighting system manufactured by

Electronic Controls Inc. The audience of the material included in this manual is for certified installation

personnel. The CabLite® ECO lighting system complies with modern performance specifications and

meets or exceeds code requirements. Installation and adjustments must meet local, state and national

codes.

Thank you for purchasing equipment from ECI America, INC. We want your new equipment to operate

safely. Anyone who installs or uses this equipment should read this publication (and any other relevant

publications) before installing or operating the equipment.

To minimize the risk of potential safety problems, you should follow all applicable local and national

codes that regulate the installation and operation of your equipment. These codes vary from area to area

and usually change with time. It is your responsibility to determine which codes should be followed, and

to verify that the equipment, installation and operation is in compliance with the latest revision of these

codes.

At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical

Code, ASMEA17.1 Safety code for Elevators and Escalators and the codes of the National Electrical

Manufacturer's Association (NEMA). There may be local regulatory or government offices that can also

help determine which codes and standards are necessary for safe installation and operation. Equipment

damage or serious injury to personnel can result from failure to follow all applicable codes and standards.

We do not guarantee the products described in the publication are suitable for you particular application,

nor do we assume any responsibility for your product design, installation or operation.

Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as

online control equipment in hazardous environments requiring fail-safe performance, such as in the

operation of nuclear facilities, aircraft navigation of communication systems, air traffic control, direct life

support machines or weapon systems in which the failure of the product could lead directly to death,

personal injury, or severe physical or environmental damage ("High Risk Activities"). ECI America, Inc.

specifically disclaims any expressed or implied warranty of fitness for High Risk Activites.

This publication is based on information that was available at the time it was printed. WE reserve the

right to make changes to the products and/or publications at any time without notice and without any

obligation.

All trademarks or registered product names appearing in this document, as they pertain to Electronic

Controls, Inc., are the exclusive property of Electronic Controls, Inc.

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com

P a g e

| 4