Epson Perfection 3200 Software Manual - Page 19

Browse online or download pdf Software Manual for Software Epson Perfection 3200. Epson Perfection 3200 34 pages. Scanning application force quits on mac os 10.4
Also for Epson Perfection 3200: Product Support Bulletin (34 pages), Product Information (6 pages), Safety And Warranty Manual (8 pages), Start Manual (8 pages), Product Support Bulletin (23 pages), Product Support Bulletin (40 pages), Product Support Bulletin (24 pages), Product Support Bulletin (29 pages), Product Support Bulletin (8 pages), Product Support Bulletin (3 pages), Product Support Bulletin (14 pages), Product Support Bulletin (18 pages), Product Support Bulletin (12 pages), Product Support Bulletin (40 pages), Product Support Bulletin (11 pages), Product Support Bulletin (40 pages), Product Support Bulletin (22 pages), Product Support Bulletin (12 pages), Product Support Bulletin (21 pages)

Print Page
Epson Perfection 3200 Software Manual
3
Once you've confirmed the settings, click
the Options button. The SilverFast Defaults
screen appears:
4
For Gamma-Gradation, enter 2.20. Check
for HDR output, then click the CMS tab.
The CMS Defaults screen appears:
5
Turn off all the color management options
for the target scan. You need to do this
whenever you scan a profiling target.
In the Color Management section, set
Scanner->Internal and Internal->Monitor
to <NONE>, and set Internal->Output to
RGB.
In the Profiles for ColorSync section, set
all profiles to <NONE>. You can leave
the other settings at their defaults.
6
When you've completed all the settings,
click OK.
7
On the main SilverFast screen, click the
Frame tab. Set the Scan Type to 48-bit
HDR Color, and set the resolution slider to
300 dpi, as shown:
15