Dimplex BF9000 Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Indoor Fireplace Dimplex BF9000. Dimplex BF9000 19 pages. Dimplex
Also for Dimplex BF9000: Service Manual (17 pages), Owner's Manual (20 pages), Troubleshooting Manual (2 pages), Owner's Manual (19 pages), Service Manual (18 pages)
Print Page
Fireplace Installation
Figure 1
7
8
"
8
(225 mm)
Install the fireplace assembly
into the mantel. (refer to mantel
assembly instructions)
!
NOTE 1: A 15 Amp, 120
Volt circuit is required. A
dedicated circuit is preferred
but not essential in all cases. A
dedicated circuit will be required
if, after installation, the circuit
breaker trips or fuse blows on a
regular basis when the heater is
operating. Additional appliances
on the same circuit may exceed
the current rating of the circuit
breaker.
!
IMPORTANT: If not using
a Dimplex mantel, the fireplace
must be installed in an enclosure
with the mInImum internal/
opening dimensions see Figure 1.
8
18 ¼"
(463 mm)
24 1/2"
(622 mm)
New Wall Construction
CAUTION:
circulation beneath the fireplace
insert is provided by two (2)
rubber feet (Figure 2).
install the fireplace insert
directly on carpet or similar
surfaces which may restrict
air circulation. If installing the
fireplace in a carpeted area, place
a one-piece, solid, flat surface
under the fireplace insert. Ensure
that all both of the insert's feet
rest securely on this surface.
1.
select a suitable location that
is not susceptible to moisture
and is away from drapes,
furniture and high traffic.
2.
Place the fireplace in the
desired location to see how it
will look in the room.
3.
mark the desired location
on the floor and store the
Figure 2
Feet
Clearance for air
Do not
Opening
Visible Edges
www.dimplex.com