Dimplex BF9000 Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Indoor Fireplace Dimplex BF9000. Dimplex BF9000 19 pages. Dimplex
Also for Dimplex BF9000: Service Manual (17 pages), Owner's Manual (19 pages), Owner's Manual (20 pages), Troubleshooting Manual (2 pages), Service Manual (18 pages)

Print Page

Maintenance

Helpful Hints: It is a good idea

to replace both light bulbs at one

time if they are close to the end

of their rated life. Group replace-

ment will reduce the number of

times you need to open the unit

to replace light bulbs.

be taken when removing the Log

Set Assembly as it contains LED's

and

wires.

CAUTION: Allow at least five

minutes for light bulbs to cool

before touching bulbs to avoid ac-

cidental burning of skin.

1. Remove front glass assembly.

2. Pull the back edge of the

plastic ember bed forward

until the rear tab releases

from the ledge located at the

bottom of the partially reflec-

tive glass. (Figure 9)

! IMPORTANT: Only handle the

log set by the ember bed.

! NOTE: Log set fits tightly into

firebox, some force may be nec-

essary to remove.

3. Set log set in front of fire-

place.

4. Disconnect the flicker rod

from the motor (see Figure 8).

5. Unscrew bulbs counter clock-

wise.

Care must

6. Insert new bulbs.

7. Reconnect the flicker rod to

the motor.

8. Replace the log set by insert-

ing the front edge of the log

set and push down on the

rear edge of the ember bed

until it snaps into place (Fig-

ure 9).

! NOTE: Ensure the log set is

installed tightly under the back

ledge to prevent light leakage.

9. Replace glass assembly.

Figure 8

Flicker Rod

Figure 9

Back

Ledge

Rear

Tab

Side Section

Log

Ember

Bed

Front

Edge