ECKey EK6 series Nstallation And Operation Manual - Page 3

Browse online or download pdf Nstallation And Operation Manual for Security System ECKey EK6 series. ECKey EK6 series 15 pages. Internal/external mounting – red and green led control from access control system
Also for ECKey EK6 series: Installer's Manual (9 pages)

Print Page

Enrolling a User

Manual Pairing Mode (default)

While the status light is red, press and hold Administration Button until it flashes blue and red.

Enroll user on reader by enabling phone's Bluetooth and placing within range of the reader. Consult your

phone's documentation for proper procedure.

Locate and select reader from phone, and enter PIN when prompted (default is 1234) – status light blinks

blue during enrollment, solid blue when successful. The reader will trigger once and status light will return

to red. Repeat this process, from button press to trigger, for each phone you would like to pair.

After all phones have been paired, press and release the Administration Button to reset the reader.

Automatic Pairing Mode

Enroll user on reader by making phone discoverable and placing within Pairing Range of the reader

(default is approx. 3ft/1M). Use the ECKey Unlock App to easily place in discoverable mode, or consult

your phone's documentation for proper procedure.

Reader should locate your phone. Enter PIN when prompted (default is 1234) – status light blinks blue

during registration, solid blue when successful. The reader will trigger once and status light will return to

red. Make phones discoverable one-by-one until all phones are paired.

After all phones have been paired, press and release the Administration Button to reset the reader.

Triggering the Reader

Most triggering options require the phone to be in discoverable mode, and we offer the ECKey Unlock App for

iPhones and Android Smartphones that makes it easy to accomplish this at http://www.ECKey.com/download/.

You can also make your phone discoverable by following your phone manufacturer's instructions; this is typically in

Settings->Bluetooth->Make My Phone Discoverable.

Some versions of the Android OS allow phones to remain discoverable all the time, others may limit Bluetooth dis-

coverable mode to a few minutes before shutting off. In these cases, you would need to re-enable discoverable mode

for each trigger of the reader.

Note: To make iPhones discoverable you must be in the Bluetooth settings page or use the ECKey Unlock App for iPhones.

iPhones will not be discoverable on the home screen or when sleeping.

ECKey Installation and Operation Guide