Epson PowerLite 400W Quick Setup Manual - Page 2

Browse online or download pdf Quick Setup Manual for Software Epson PowerLite 400W. Epson PowerLite 400W 6 pages. Warranty booklet
Also for Epson PowerLite 400W: User Manual (42 pages), Operation Manual (36 pages), Catalog (10 pages), Product Specifications (2 pages), Operation Manual (47 pages), Supplementary Manual (4 pages), User Manual (1 pages), Product Support Bulletin (25 pages), Product Support Bulletin (22 pages), Update Manual (4 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Declaration Of Conformity (4 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page

Choose a location

You can set up the projector in a variety of ways. The projector's short-throw

lens leaves plenty of room for your audience and allows you to present

comfortably in front of them without casting a shadow on the screen.

To install the projector in a classroom or

other setting, you can mount the projector

to a wall or compatible whiteboard using

an optional Epson

wall mounting system.

Using an interactive whiteboard, you can

even control your computer presentation

by touching the projected display on the

board surface.

If you'll need to take the projector from

place to place, you can set it up on a table

in front of the screen.

You can also mount the projector from the ceiling and/or project from the

rear using a translucent screen. If you project upside-down from a wall or the

ceiling, or from the rear, you'll need to select the correct projection option in

the projector's Extended menu. See the User's Guide on your CD-ROM for

instructions.

The distance between the projector and the screen determines the size of the

image, and can vary depending on the aspect ratio (width-to-height ratio) of

the image and your screen. Ideally, you should place the projector between

26 and 48 inches from the screen or whiteboard. Be sure to include the slight

offset from the center of the projector's lens to the edge of your image.

Here are the approximate distances and offsets you should use in placing the

projector for images displayed in the projector's native 16:10 aspect ratio:

16:10 aspect ratio

To calculate the distance and offset for 4:3 or 16:9 aspect ratio images or

projection surfaces, see the User's Guide on your CD-ROM. (For more help

determining the size of your image, use the Image Size Calculator on the

Multimedia Projectors page on Epson's website.)