Eckman CS015 User Manual - Page 12

Browse online or download pdf User Manual for Chainsaw Eckman CS015. Eckman CS015 17 pages. Telescopic pole chain saw

Print Page

5. When ready to make a cut, press in trigger lockout and squeeze trigger(See Figure

9). This will turn pole saw on. Releasing trigger will turn pole saw off. Make sure saw

is running before starting a cut.

Figure 9

6. When starting a cut, place moving chain against wood. Hold pole saw firmly in

place to avoid possible bouncing or skating (sideways movement) of saw.

7. Remove pole saw from a cut with saw running at full speed. Stop pole saw by

releasing trigger. Make sure chain has stopped before setting pole saw down.

CLEANING AND MAINTENANCE

Keep saw body clean. Use a soft cloth dampened with a mild soap and water mixture.

Wipe saw body to clean.

Uneven bar wear causes most guide bar problems. Incorrect sharpening of chain

cutter and depth gauge settings often cause this. When bar wears unevenly, it widens

guide bar groove (See Figure 10). This causes chain clatter and rivet popping. Saw

will not cut straight. Replace guide bar if this occurs.

Inspect guide bar before sharpening chain. A worn or damaged guide bar is unsafe. A

worn or damaged guide bar will damage chain. It will also make cutting harder.

Figure 10