Epson PowerLite 4650 Operation Manual - Page 35

Browse online or download pdf Operation Manual for Software Epson PowerLite 4650. Epson PowerLite 4650 48 pages. Remote control information
Also for Epson PowerLite 4650: Operation Manual (47 pages), Quick Reference Card (7 pages), Product Specifications (6 pages), Declaration Of Conformity (4 pages), Installation Handbook (3 pages), Function Manual (2 pages), Quick Reference (6 pages)

Print Page
Epson PowerLite 4650 Operation Manual
Using the control functions
The following table shows the meanings of the control buttons.
Power On
Turns the projector power on.
Power Off
Turns the projector power off.
Switch source
Switches the input source to the Computer1
Computer1
port or Computer port.
Switch source
Switches the input source to the Computer2
Computer 2
port.
Switch source
Switches the input source to the BNC port.
BNC
Switch source
Switches the input source to the S-Video port.
S-Video
Switch source
Switches the input source to the Video port or
Video (RCA)
video2 port.
Switch source
Switches the input source to the Video1 port.
Video (BNC)
Switch source
Switches the input source to the SDI port.
SDI
Switch source
Switches the input source to the HDBaseT
HDBaseT
port.
Switch source
Switches the input source to the DisplayPort
DisplayPort
port.
Switch source
Switches the input source to the DVI-D1 port
DVI-D, HDMI 1
or HDMI1 port.
If the projector is equipped with either a
DVI-D port or HDMI port, use this button to
switch the input signal.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
DVI-D as an input source.
Switch source
Switches the input source to the DVI-D2 port
DVI-D, HDMI 2
or HDMI2 port.
If the projector is equipped with both DVI-D
port and HDMI port, use this button to select
HDMI as an input source.
Switch source
Switches the input source to the D4 port.
D-Video
Switch source
Switches the input source to EasyMP or
EasyMP
EasyMP.net.
Switch source
Switches the input source to USB Display.
*
USB Display
Switch source
Switches the input source to the external
*
USB1
equipment connected via a USB (Type A) port
or USB1.
Switch source
Switches the input source to the external
*
USB2
equipment connected via a USB2 port.
Switch source
Switches the input source to the image
*
LAN
projected by the computer via a network.
Switch source
Switches the input source to Whiteboard.
Whiteboard
*
If the button does not function, you can switch the input source using the
button.
• Some connected projectors may not be equipped with all of the above ports
q
or functions. If you click a button for a port or function that is not
available, nothing will happen.
35