Epson PowerLite 735c Product Information - Page 12

Browse online or download pdf Product Information for Software Epson PowerLite 735c. Epson PowerLite 735c 14 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson PowerLite 735c: User Manual (42 pages), Operation Manual (36 pages), User Manual (29 pages), Specifications (2 pages), Operation Manual (47 pages), Parts List (1 pages), Product Support Bulletin (30 pages), Installation Manual (19 pages), Quick Setup Manual (2 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page
Epson PowerLite 735c Product Information
EPSON PowerLite 735c Projector

Replacing the Lamp

The projection lamp typically lasts for about 1500 hours of
use. It is time to replace the lamp when:
❏ The projection image gets darker or starts to deteriorate.
❏ The lamp warning light
❏ The message
LAMP REPLACE
the lamp comes on (after about 1400 hours of use). To
maintain projector brightness and image quality, replace
the lamp as soon as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the
United States for a replacement lamp. Request part number
. In Canada, please call (800) 463-7766 to locate
V13H010L18
a dealer.
Follow these steps to replace the lamp:
1. Turn off the projector, wait for the power light to stop
flashing, then unplug the power cord.
2. Allow the projector to cool down for at least half an hour (if
it has been on).
Warning: Let the lamp cool before replacing it. If the lamp
breaks, handle the shards carefully to avoid injury.
3. If your projector is mounted on the ceiling, unmount it.
4. Turn the projector upside-down to access the lamp
compartment.
5. Press the two tabs and remove the lamp cover.
)
6. Use a screwdriver to loosen the two screws holding the
lamp in place. (You can't remove these screws.)
12
EPSON PowerLite 735c Projector
-
is red or flashing red.
appears on the screen when
7. Grasp the lamp by the top, as shown, and pull it straight
out.
Caution: Don't touch the glass portion of the new lamp
assembly. Doing so could result in premature lamp failure.
8. Gently insert the new lamp.
9. Once the lamp is fully inserted, tighten its screws.
10. Replace the lamp cover.
Note: The projector won't come on if the lamp cover is loose.

ESC/VP21 Commands

Item
Power
ON
On/Off
OFF
Signal
Computer/Component
selection
Video (RGB)
Computer/Component
Video (YCbCr)
Computer/Component
Video (YPbPr)
Video
S-Video
A/V Mute
ON
On/Off
OFF
A/V Mute
Black
selection
Blue
User's Logo
Auto
ON
Keystone
OFF
2/03
Command
PWR ON
PWR OFF
SOURCE 11
SOURCE 14
SOURCE 15
SOURCE 41
SOURCE 42
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
AUTOKEYSTONE ON
AUTOKEYSTONE OFF