Epson PowerLite 737c Product Information - Page 9

Browse online or download pdf Product Information for Software Epson PowerLite 737c. Epson PowerLite 737c 24 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson PowerLite 737c: User Manual (42 pages), Operation Manual (36 pages), Quick Setup Manual (2 pages), Operation Manual (47 pages), Parts List (1 pages), Product Support Bulletin (30 pages), Installation Manual (19 pages), User Manual (1 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Quick Setup (2 pages)

Print Page
Epson PowerLite 737c Product Information

Using Password Protection

If you assign a password for the projector, a screen appears
requesting the password whenever you plug in and turn on the
projector. If you enter the password incorrectly three times in
succession, the projector's operation is locked. Disconnect the
projector and reconnect it. If you enter the incorrect password
30 times in a row, the projector is locked and remains locked
until an authorized Epson servicer can unlock it.
You can also create a user's logo for the projector, to be
displayed as the startup screen and/or AV/Mute screen.
Unauthorized users cannot turn it off or change it. This
discourages theft and provides a way to identify the projector
should it be stolen.
Additionally, to make sure a borrowed projector is returned,
you can temporarily disable the password for a set period of
time. When that time has elapsed, the password function is
reactivated and you must enter the password before you can use
the projector.
Note:
If you should happen to enable the password before you set one,
enter the default password
0000
If you lose the remote control, you will not be able to enter the
password; so keep the remote control in a safe place at all times.

Setting a Password

1. Press the
button on the remote control for about
Freeze
5 seconds, until you see the Password Protect menu:
If a password has already been set, you see the Password
Protect Release screen. See "Starting the Projector with a
Password" on page 10.
2. Set
Power ON Protect
3. Press
.
Esc
4. Select
and press
Password
Change the password?
5. Select
and press
Yes
Enter
6. Hold down the
button on the remote control and use
Num
the numeric keypad to enter a 4-digit password.
when prompted.
to
and press Enter.
ON
. You see the message
Enter
.
Epson PowerLite 737c Projector
The password will be
displayed as
. After you
****
enter the last digit, a
confirmation screen appears.
Enter the password again.
7. After you finish setting the
password, press the
button to return to the
Password Protect menu.
8. Press the
button to
Num
deactivate the numeric
keypad.
Make a note of the password and keep it in a safe place.

Turning On the Password and User's Logo

To enable the password and User's Logo, follow these steps:
1. Press the
button on the remote control for about 5
Freeze
seconds until you see the Password Protect menu.
2. Select
Power ON Protect
3. Select
press
ON and
After turning on this feature, you have to unplug the
projector (not just turn it off) in order to activate it. The
password prompt appears only after plugging in the
projector and turning it on.
4. If you want to disable the password temporarily so someone
can use the projector without entering the password, select
and press
Timer
Enter
while you use the numeric keypad to enter the number of
hours (from 0 to 9999) you want the password feature
disabled. If you want the projector to request the password
every time it is turned on, set the timer to
The timer starts counting as soon as you close the Password
Protect menu. (You can check the elapsed time in this menu
next to
Time elapsed
When the period defined in the Time-elapsed setting has
passed, and the password is entered correctly, the elapsed
time is reset to
0H
disable or change this setting when you're finished using it.
5. To enable your User's Logo, select
press
. Then select
Enter
When this feature is on, the logo appears when the projector
is turned on (if the
Extended menu) and as the A/V Mute screen (if you selected
as the
Logo
Background Color
Note:
None of the User's Logo features can be changed when the User's
Logo Protect function is enabled.
6. Press
to close the Password Protect menu.
Menu
2/05
Esc
Numeric keypad
and press
.
Enter
.
Esc
. Then hold down the
Num
.
0H
.)
and the timer starts again. Remember to
User's Logo Protect
and press
.
ON
Enter
is enabled in the
Startup Screen
in the Extended menu).
Epson PowerLite 737c Projector
Num button
button
and
9
-