Epson PowerLite 84 Installation Handbook

Browse online or download pdf Installation Handbook for Software Epson PowerLite 84. Epson PowerLite 84 3 pages. Lamp and status information
Also for Epson PowerLite 84: User Manual (42 pages), Specifications (6 pages), Operation Manual (47 pages), Specifications (2 pages), Quick Setup Manual (9 pages), User Manual (1 pages), Quick Setup (4 pages), Product Support Bulletin (25 pages), Parts List (1 pages), Product Support Bulletin (22 pages), Parts List (1 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Declaration Of Conformity (4 pages), Product Support Bulletin (15 pages)

Print Page
Epson PowerLite 84 Installation Handbook
Epson PowerLite 84
Replacing the Lamp
The life span of the projection lamp is about 5000 hours if
in the Setting menu is set to
Brightness Control
6000 hours if
Brightness Control
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The message
Replace the lamp
lamp comes on and the lamp warning light
maintain projector brightness and image quality, replace the lamp
as soon as possible.
The lamp warning light
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L50.
Replacing the Lamp
1. Turn o the projector.
2. When the P power light stops ashing, unplug the power cord.
3. Let the projector cool for at least an hour (if it has been on). The
lamp is extremely hot immediately after use.
4. Loosen the lamp cover screw (you can't remove it). Then slide the
lamp cover and lift it o of the projector.
(default), and
High
is set to
.
Low
appears on the screen when the
ashes orange. To
ashes red (the lamp is burnt out).
INSTALLATION HANDBOOK
Lamp and Status Information