Toshiba 13A20 Service Manual - Page 20

Browse online or download pdf Service Manual for TV Toshiba 13A20. Toshiba 13A20 38 pages.

Print Page

The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL s or t button.

First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.

If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.

TV/CABLE function

Press POWER, to turn on the TV.

Press MENU (then s or t) repeatedly until "TV/CABLE" in

the Set up menu is displayed in purple.

Press ;(<) or :(>) until the mode that corresponds to your

TV signal system is displayed in purple.

CH PROGRAM function

Press MENU (then s or t) repeatedly until "CH PRO-

GRAM" in the Set up menu is displayed in purple.

Press ;(<) or :(>) to start channel programming.

The TV will automatically cycle through all the TV or CABLE

channels depending on the mode selected, and store

active channels in the channel memory.

When channel programming is complete, you will see the

message to the right.

Press CHANNEL s or t to make sure the channel pro-

gramming has been done properly.

PROGRAMMING CHANNEL MEMORY

– 17 –

ADD/ERASE function

After performing the CH PROGRAM function, you can add

or erase specific channels.

Select the channel you want to erase using the CHANNEL

s or t button, or select the channel you want to add using

the Channel Number buttons.

Press MENU (then s or t) repeatedly until "ADD/ERASE"

in the Set up menu is displayed in purple.

Press ;(<) or :(>) :

To erase the channel

Press the button until "Erase" is displayed in purple indicat-

ing that the channel has been erased from the memory.

To add the channel

Press the button until "ADD" is displayed in purple indicat-

ing that the channel has been memorized.

Repeat steps 1 to 3 for other channels.

You have now completed the channel programming.