Toshiba 13A26C Owner's Manual - Page 11
Browse online or download pdf Owner's Manual for TV Toshiba 13A26C. Toshiba 13A26C 29 pages. Toshiba color television owner's manual 13a26c, 19a26c
Also for Toshiba 13A26C: Service Manual (43 pages)
Print Page
USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD.
TO REGISTER YOUR PASSWORD
1
Press MENU and then press SET + or – until the indicator
next to "LOCK" begins to flash, then press ENTER.
2
Enter your 4-digit password using the Channel Number
buttons (0–9).
If you enter an incorrect password, press RESET, and
then press ENTER.
3
Enter the password again, and then press ENTER.
The password is now registered and the LOCK menu
appears.
LOCKING CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting.
You can choose to lock up to nine TV channels and nine cable channels.
1
Use the Channel Number buttons (0–9) to tune the
television to the channel you wish to lock.
2
Press MENU, then press SET + or – until the indicator
next to "LOCK" begins to flash. Then press ENTER.
Use the Channel Number buttons (0–9) to enter your
3
password, then press ENTER.
The LOCK menu appears.
Press SET + or – until the indicator next
4
to "CH LOCK" begins to flash, then
press ENTER.
Press SET + or – to select:
5
• INPUT: To select the channel as one
to be locked. Then press ENTER.
• ALL CLEAR: To clear all channels from
the list of locked channels. Then press
ENTER.
LOCKING VIDEO INPUT
You can use the VIDEO LOCK feature to lock the input source
(VIDEO) and channels 3 and 4. You will not be able to select the
input sources with the TV/VIDEO button or Channel Number
buttons unless you clear the setting.
Press MENU, then press SET + or – until the indicator
1
next to "LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your
2
password, then press ENTER. The LOCK menu appears.
Press SET + or – until the indicator
3
next to "VIDEO LOCK" begins to flash,
then press ENTER.
4
Press SET + or – to select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3, and channel 4.
This option should be used if you use the antenna
to play a video tape.
5
Repeatedly press MENU until the menu screen closes.
NOTE:
After programming VIDEO LOCK, change channels or press the
TV/VIDEO key before turning off the television.
3X00221A(E)_P08-12
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
CHANGE PASSWORD
〈 + / – / ENTER / MENU 〉
CH LOCK
CABLE
INPUT
--- --- ---
--- --- ---
--- --- ---
ALL CLEAR
〈 + / – / ENTER / MENU 〉
VIDEO LOCK
OFF
VIDEO
VIDEO+
〈 + / – / ENTER / MENU 〉
11
NOTES:
• To change your password, follow steps 1 and 2 and select
"CHANGE PASSWORD" option. Then enter your new
password.
• If you forget or lose your password, you can reset it using the
following procedure:
- While holding down the VOLUME ∞ button on the TV, press
"0" on the remote control for a few seconds.
6
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, repeatedly press MENU until
the menu screen closes.
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
• If you are accessing the LOCK menus for the first time,
choose a four-digit number to be your password.
• After programming CH LOCK, change channels before
turning off the television.
• To unlock all channels, select ALL CLEAR in step 5,
then press ENTER.
SETTING THE GameTimer™
You can use the GameTimer™ feature to automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a video game (30, 60, 90, or 120 minutes).
1
Press MENU, then press SET + or – until the indicator next to
"LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your
2
password, then press ENTER. The LOCK menu appears.
3
Press SET + or – until the indicator next
to "GAME TIMER" begins to flash, then
press ENTER.
Press SET + or – to select a time limit
4
(30 minutes, 60 minutes, 90 minutes,
120 minutes, or OFF).
Repeatedly press MENU until the menu screen closes.
5
After the GameTimer is programmed, a display will appear
briefly every ten minutes to remind you that the GameTimer
is operating.
When the programmed end time is reached, the TV will
change the channels automatically and the VIDEO LOCK
feature will be activated.
To turn off the VIDEO LOCK:
See "LOCKING VIDEO INPUT," at left.
05.12.23, 9:29 AM
GAME TIMER
OFF
30
60
90
120
+ / Ð / ENTER / MENU
〈
〉
11