Toshiba 20A44 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for TV Toshiba 20A44. Toshiba 20A44 33 pages. Toshiba color television owner's manual 20a44
Also for Toshiba 20A44: Service Manual (4 pages), Service Manual (41 pages)

Print Page

REMOTE CONTROL

POWER

SLEEP

VOL

–

RESET

TV/VIDEO

1. POWER Button - Press to turn on the TV. Press again

to turn off the TV.

2. Direct Channel Selection Buttons (0–9) - Allows direct

access to any channel.

3. CH RTN Button - Repeatedly press CH RTN to toggle

back and forth between the last two channels you tuned.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AAA" (penlight size) batteries.

3. Replace the battery compartment cover.

3M91301A-E P02-07

CH RTN

RECALL

MUTE

CH +

VOL

ENTER

CH –

–

SET

MTS

1/2

CAP/TEXT

CT-837

4. SLEEP Button - To set the TV to turn off after a preset

amount of time, press the SLEEP button on the remote

control. The clock will count down 10 minutes each time

the button is pressed in the order of 120, 110, 100, ······ 20,

10, 0. After the sleep time is programmed, the display will

disappear then reappear momentarily every ten minutes to

remind you the sleep timer function is operating. To

confirm the sleep time setting, press the SLEEP button

once and the remaining time will be momentarily displayed.

To cancel sleep time, press the SLEEP button repeatedly

until the display turns to 0.

5. VOL (VOLUME) + / – Buttons - Press the + button to

increase, or the – button to decrease the volume level.

6. MENU Button - Press to display the on-screen menu function.

7. SET + / – Buttons - Press to select the desired setting

during on-screen operations.

8. RESET Button - Press to reset the on-screen picture

adjustments to their factory preset positions.

9. TV/VIDEO Button - Switches between the TV and external

device inputs.

10. RECALL Button - When you press this button, the

channel number will appear in the upper right corner of the

screen. Press the button again to remove it from the screen.

11. MUTE Button - To turn off the sound, press this button

once. The TV will be silenced and the word "MUTE" will

appear on the screen. The muting feature can be released

by pressing the MUTE button again or one of the VOL + or

– buttons.

12. CH (CHANNEL) + / – Buttons - Press the + button to

change to a higher numbered channel set into memory.

Press the – button to change to a lower numbered channel

set into memory.

13. ENTER Button - Press to enter or select information for

On-screen operations.

14. MTS Button - Switches sound between mono, stereo, and

SAP when receiving broadcasts in stereo or SAP.

15. 1/2 Button - Switches between channel 1 and channel 2

in the closed caption mode.

16. CAP/TEXT Button - Press to switch between normal TV

and the two closed caption modes (captions or text), when

available.

Use two "AAA" size penlight batteries (supplied) for the

remote control. The batteries may last approximately one

year depending on how much the remote control is used.

For best performance, it is recommended that batteries

should be replaced on a yearly basis, or when the remote

operation becomes erratic.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries

in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the

batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc) or old batteries with fresh

ones.

4. If the remote control will not be used for a long period of

time, remove the batteries to prevent damage or injury

from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged;

they can overheat and rupture. (Follow battery

manufacturer's directions.)

13/2/04, 2:06