Toshiba 20AS22 Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for TV Toshiba 20AS22. Toshiba 20AS22 9 pages. 20as22 user's guide
Also for Toshiba 20AS22: Service Manual (33 pages)

Print Page

LOCATION OF CONTROLS

POWER

VOLUME

CHANNEL

VIDEO

AUDIO

SET

ENTER

RESET

1. POWER indicator - Lights up when the power is turned on.

2. Remote Sensor - Signals from the Remote Control unit are received here.

3. POWER Button - Press to turn the TV on or off.

4. VOLUME L/M Buttons - Press to raise or lower the level of the sound.

(MENU Buttons) - Press both VOLUME L/M Buttons at the same time to display the On-

Screen menu functions.

(SET + / – Buttons) - Press to select the desired setting during On-Screen operations.

5. CHANNEL L/M Buttons - Press to select a higher or lower numbered channel set into memory.

(ENTER Button) - Press to enter or select information for On-Screen operations.

(RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture

adjustments to their factory preset positions.

6. AUDIO VIDEO IN Jacks - Audio and video signal cables from an external source can be

connected here.

SETTING LANGUAGE

This TV can display the channel number, on screen displays and picture adjustments on the

screen in English, Spanish or French.

On-screen language selection (step 3) will automatically appear on the screen when you press

MENU button initially. Select the language you prefer first, then proceed with the other menu options.

Press MENU.

Press SET + or – until the indicator next to "LANGUAGE" begins to flash,

then press ENTER.

Press SET + or – until the "

" indicator points to the desired

language: English (ENGLISH), Spanish (ESPAÑOL) or French

(FRANCAIS), then press ENTER.

Press MENU again.

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,

but the Closed Caption text will not be affected by the language selection.

TV OPERATION

To turn on the TV, press POWER.

The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) + or –.

The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As

the sound level increases, so do the number of BARS AND THE NUMBER on the screen.

The same is true for decreasing the level.

Set the TV/CABLE menu option to the appropriate position. When shipped from the factory,

this menu option is in the CATV setting. See "TO MEMORIZE CHANNELS".

TV - VHF/UHF channels

CABLE - CABLE TV channels

CH (CHANNEL) + and – buttons

Press and release CH (CHANNEL) + or –. The channel automatically stops at the next

channel set into memory. Press and hold the button down to change channels more

quickly.

For proper operation, before selecting channels, they should be set into the TV's memory.

See "TO MEMORIZE CHANNELS".

DIRECT CHANNEL SELECTION buttons (0-9) - Press these buttons to select a channel. The

channel number will appear on the upper right corner of the TV screen. If an invalid channel

number is selected, the display will revert to the previous channel.

TV MODE DIRECT CHANNEL SELECTION - When the TV/CABLE menu option is in the TV

position, all channels can be instantly selected by using two buttons (For example, to select chan-

nel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few sec-

onds). For channels 10 and above, press the 2 digits in order.

CABLE mode direct channel selection

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

1-9

Press "0" twice, then 1-9 as needed.

Example, to select channel 2, press "002".

10-12

Press "0", then remaining 2 digits.

Example, to select channel 12, press "012".

13-99

Press the 2 digits in order.

Example, to select channel 36, press "36".

Press the 3 digits in order.

100-125

Example, to select channel 120, press "120".

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15

minutes.

3L21001A E

POWER

VOLUME

CHANNEL

VIDEO

AUDIO

SET

ENTER

RESET

1 2

CH SET

PICTURE

LANGUAGE

V-CHIP SET

LOCK

〈 + / – / ENTER / MENU 〉

LANGUAGE / IDIOMA / LANGUE

ENGLISH

ESPAÑOL

FRANCAIS

〈 + / – / ENTER / MENU 〉

CLOSED CAPTION

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs.

Closed Captioning will display text on the screen for hearing impaired viewers or it will translate

and display text in another language.

TO VIEW CLOSED CAPTIONS

Press CAP/TEXT on the remote control to switch between normal TV and the two Closed Cap-

tion Modes (Captions and 1/2 of Full Screen Text).

Captions: This Closed Caption Mode will display text on the screen in English or another

language (depending on the setting of Closed Captions 1/2. Generally, Closed Captions in

English are transmitted on Captions Channel 1 and Closed Captions in other languages are

transmitted on Captions Channel 2.

The Captions will appear in places on the screen where they will least interfere with the picture,

usually on the bottom of the screen. News programs will usually show three-line Closed Captions

which scroll onto the screen. Most other shows provide two or three lined Captions placed near

the character who is speaking so the viewer can follow the dialogue. Words in italics or

underlined describe titles, words in foreign languages or words requiring emphasis. Words that

are sung usually appear enclosed by musical notes.

Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming

schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it

is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or

a break in the signal, the Captions will reappear when the signal is received again. If the channels

are changed, the Captions will be delayed approximately 10 seconds.

For television programs broadcasting with Closed Captions, look in your TV guide for the Closed

Captions symbol (CC).

• When activating the Closed Captioned Decoder, there will be a short delay before the Closed

Captioned text appears on the screen.

• Closed Captioned text is only displayed in locations where it is available.

• If no caption signal is received, no captions will appear, but the television will remain in the

Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is

normal with Closed Captioning, especially with live programs. This is because during live

programs, captions are also entered live. These transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may not be

seen or may interfere with Closed Captions.

• Some cable systems and copy protection systems may interfere with the Closed Captioned

signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not

appear or may appear with strange characters or misspelled words. In this case, adjust the

antenna for better reception or use an outdoor antenna.

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the TV to skip up or down to the

next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal

VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an

antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this

menu option is in the CABLE setting.

TV/CABLE SELECTION

Press MENU.

Press SET + or – until the indicator next to "CH SET" begins to flash, then

press ENTER.

Press SET + or – until the indicator next to "TV/CABLE" begins to

flash.

Press ENTER to select the TV or CABLE mode. The arrow indicates the

selected mode.

Press MENU repeatedly until the MENU screen is cleared.

NOTE:

Contact your cable company to determine the type of cable system used in your area.

AUTOMATIC CHANNEL MEMORY

Press MENU.

Press SET + or – until the indicator next to "CH SET" begins to flash, then

press ENTER.

Press SET + or – until the indicator next to "AUTO CH MEMORY" be-

gins to flash, then press ENTER. The TV will begin memorizing all the

channels available in your area. Channel numbers will remain red until

auto memorizing is complete.

Press MENU repeatedly until the MENU screen is cleared.

TO ADD/DELETE CHANNELS

Press MENU.

Press SET + or – until the indicator next to "CH SET" begins to flash, then

press ENTER.

Press SET + or – until the indicator next to "ADD/DELETE" begins to

flash, then press ENTER.

Select the desired channels to be added or deleted using the Direct

Channel Selection buttons (10 keys. 0-9), CH + or – or SET + or –.

Press ENTER to select ADD or DELETE.

If an unmemorized channel was selected (step 4), the channel indica-

tion will be red. Press ENTER if you wish to ADD the unmemorized

channel. The channel indicator will change from red to green when a

channel is added and the channel will be memorized.

If a memorized channel was selected (step 4), the channel indication will

be green. Press ENTER if you wish to DELETE the channel from

memory. The channel indicator will change from green to red when a

channel is deleted. Repeat Steps 4 and 5 for each channel to be added

or deleted.

Press MENU three times after adding or deleting all of the desired

channels, to return to normal TV viewing.

04/04/2002, 10:53

CH SET

PICTURE

LANGUAGE

V-CHIP SET

LOCK

〈 + / – / ENTER / MENU 〉

CH SET

PICTURE

LANGUAGE

V-CHIP SET

LOCK

〈 + / – / ENTER / MENU 〉

CH SET

PICTURE

LANGUAGE

V-CHIP SET

LOCK

〈 + / – / ENTER / MENU 〉

ADD

CH 012

〈 + / – / ENTER / MENU 〉