Toshiba 20VL64 series Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for TV Toshiba 20VL64 series. Toshiba 20VL64 series 26 pages.
Print Page
20VL64-en.book Page 14 Thursday, February 1, 2007 5:06 PM
When you press P
/P
, your TV will stop only on the channels you program into the TV's channel
memory. Follow the steps below to program all active channels into the TV's memory.
Programming channels automatically
Note: All previously stored programmes will be
lost when Auto Programme is started.
Your TV can automatically detect all active
channels in your area and store them in the
channel memory.
To program channels automatically:
1. Press MENU, and then press
the Channel menu appears.
2. Press
to highlight Auto Programme and
press
or OK to display the Auto
Programme page.
Channel
Auto Programme >
Manual Programme >
Programme Edit >
Blue Screen
MENU OK EXIT
3. For the rest steps, please refer to steps
and 4,
"Tuning the TV using Quick Setup
for the first time turn-on" on page
Note: If you want to stop searching, press
,
, EXIT, or MENU.
4. Check the stored channels by pressing
P
/P
.
Adding channels manually
After you have automatically programmed the
active channels into the TV's channel memory,
you can manually add some channels or erase
some channels that you don't want to view.
To add channels:
1. In the Channel menu, press
highlight Manual Programme. Press
OK to display the Manual Programme
page.
2. Highlight Sound System and press
select a TV standard according to your
local TV system.
Programming
3. Press
channel you want to set up.
/
until
4. Press
press
descending or ascending order. If a
channel is found, the picture is displayed.
5. If the picture is not clear or the signal is
poor, you can fine tune the frequency.
Press
On
and press
the picture quality is acceptable.
Note: Under normal circumstances, you don't
3
need to use the Manual Fine Tuning or AFT
function.
13.
The Auto Fine Tuning function (AFT) if set to On
will automatically search and lock a suitable
frequency for the channel.
6. To save the current channel settings to the
TV's memory, highlight Store and press OK.
The channel number will stop flashing.
/
to
or
/
to
ENGLISH-14-
to highlight Position and press
or the numeric buttons to select a
Manual Programme
BG
Sound System
Position
01
Frequency
___.__ Mhz
Manual Fine Tuning
-
Off
AFT
Store
01
MENU OK EXIT
to highlight Frequency and
/
to start the tuning system in
to highlight Manual Fine Tuning
/
to adjust the setting until
/
+