Toshiba 22KV500B Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for TV Toshiba 22KV500B. Toshiba 22KV500B 36 pages. 19" bv series

Print Page

Digital Settings

Conﬁ guration

Audio Description (optional)

Audio description refers to an additional narration track for

blind and visually impaired viewers of visual media, including

television and movies. The description narrator talks through

the presentation, describing what is happening on the screen

during the natural pauses in the audio (and sometimes during

dialogue, if deemed necessary). You can use this feature, only

if the broadcaster supports that additional narration track.

•

In the conﬁguration menu, highlight

pressing Up or Down buttons and press OK.

•

Use

Up or Down buttons to select an item. Then use Left

or Right buttons to set.

Audio Description: This function enables or disables the

audio description feature.

Preferred Language: You can deﬁ ne a preferred language

by using this setting. This setting can be used only when it

is available.

Relative Volume: Using this option, the Audio Description

volume level can be increased or decreased relatively,

according to the general volume.

Standby Search (*)

(*) This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

If the Standby Search is set to On, when the TV is in

standby mode, the TV will look for any changes in the saved

channels.

•

Use

Up or Down button to select Standby Search and then

press Left or Right button to set this setting as On or Off.

•

If you change Standby Search to Off, this function will be

unavailable. To use Standby search please make sure that

you select Standby Search as On.

00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 18

Some of the main controls of your TV are as the following.

continued

•

Press "

time to view main menu.

•

Press

menu.

To select a programme position use the numbered buttons

Audio Description by

on the remote control. Programme positions can also be

selected using P+ and P- .

Press INFO to display the on-screen information i.e.

programme position, stereo/mono signal and picture format.

To revert to the previous programme position press

(SWAP).

Use the Input Selection window if the television does not

switch over to a connected source automatically.

• Press SOURCE button on your remote control for directly

changing sources. Or select Source option from the main

menu by using Left or Right button. Use then Up or

Down button to highlight an input and press Right button

to select.

Note: You can mark desired source options by pressing the

OK button. Therefore, when SOURCE button is pressed,

only the marked source options will be available (except for

the TV source).

English - 18 -

General Controls

Viewing Main Menu

"/ "

" buttons on the TV at the same

MENU button on the remote control to view main

Selecting Programme Positions

Input Selection

17.05.2010 16:43:25