Toshiba 23S2400 Series Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for TV Toshiba 23S2400 Series. Toshiba 23S2400 Series 27 pages. Led tv

Print Page
Toshiba 23S2400 Series Owner's Manual
Use the menu: SOUND, Advanced Sound Settings
Use the item: Sound Mode
Use the modes: Dynamic, Natural and Clear Voice
Adjusting the sound quality
You can adjust the basic sound quality.
Use the menu: SOUND, Advanced Sound Settings
Use the items: Bass and Treble
Use the button:
and
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
Use the menus: SOUND, Advanced Sound Settings
Use the item: Power Bass Booster
Use the modes: Super, Normal and Off
Resetting the Advanced Sound Settings
Use the menus: SOUND, Advanced Sound Settings
and Reset
Use the item: Reset (select YES and press OK)
Using the Dynamic Range Control
This feature allows control of compression for Dolby Digital.
Use the menu: SOUND
Use the item: Dynamic Range Control
Using the Audio Distortion Control
Prevents audio distortion.
Use the menu: SOUND
Use the item: Audio Distortion Control
Use the modes: On and Off
Using the Audio Level Offset
Sometimes there can be large changes in volume when
switching from an ATV channel or an external input.
Using this feature reduces these volume differences.
Use the menu: SOUND
Use the item: Audio Level Offset
Use the button:
and
Using the Spectrum Analyser
Shows sound in a visual format.
Use the menu: SOUND
Use the item: Spectrum Analyser
Note:
The Spectrum Analyser display turns off when any
other procedure is performed.

Other features settings

Setting the On Timer and Sleep Timer
The Timer is especially useful if you want the TV to turn
itself on or off after a selected period of time.
Use the menu: APPLICATIONS
Use the items: On Timer and Sleep Timer
Use the button: OK, Number buttons (0-9),
Con gure the following settings in On Timer:
Enable On Timer: Select On or Off .
Input: Select an input source.
Position: Select a channel.
Volume: Select a volume.
Time Until Power On: Set a time until the timer turns on.
After con guring the settings, select Done and press OK.
Press EXIT to exit the menu. Set the Standby mode
by pressing
Note:
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV's previous setting.
Use the menu: PREFERENCES and Display Settings
Use the item: Auto Format
Activating Blue Screen
With the Blue Screen function On, the screen will
automatically turn blue and the sound will be muted
(except for external input) when no signal is being received.
Use the menu: PREFERENCES
Use the item: Blue Screen
Setting the Automatic Power Down
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you don't touch the control
buttons on the remote control or on the TV control panel.
Use the menu: PREFERENCES and Energy Saving
Settings
Use the item: Automatic Power Down
Setting the No Signal Power Down
The TV will automatically turn itself off after 15 minutes
when no signal is detected. You can change the
setting to Off.
Default setting is all On.
Use the menu: PREFERENCES and Energy Saving
Settings
Use the item: No Signal Power Down
Notes:
Low signal strength of channel (no signal detection)
Only Audio L/R is connected to external input to
listen to music through the TV speakers.
A warning message will appear 1 minute before
turning off .
Panel Lock
Panel Lock disables the buttons on the TV. All buttons
on the remote control can still be used.
Use the menu: PREFERENCES
Use the item: Panel Lock
and
Note:
When Panel Lock is On, a reminder will appear when
the buttons on the TV are pressed.
- 15 -
on the remote control.