Toshiba 24 L18 Series Operating Instructions Manual - Page 18

Browse online or download pdf Operating Instructions Manual for TV Toshiba 24 L18 Series. Toshiba 24 L18 Series 31 pages.
Also for Toshiba 24 L18 Series: Operating Instructions Manual (30 pages)

Print Page

Sound Menu Contents

Volume

Equalizer

Balance

Headphone

Sound Mode

AVL (Automatic

Volume Limiting)

Headphone/Lineout

Dynamic Bass

DTS TruSurround

Digital Out

Installation Menu Contents

Automatic channel

scan (Retune)

Manual channel

scan

Network channel

scan

Analogue fine tune

Satellite Settings (**)

Installation Settings

(optional)

Setup Home

Transponder (*)

Clear Service List

Adjusts the volume level.

Selects the equalizer mode. Custom settings can be made only when in User mode.

Adjusts whether the sound comes from the left or right speaker.

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

You can select a sound mode (If the viewed channel supports).

Sets the sound to obtain fixed output level between programmes.

When you connect an external amplifier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone. If it

is set to Lineout, the output from the headphone socket will be set to maximum which

could damage your hearing.

Enables or disables the Dynamic Bass.

Enables or disables the DTS TruSurround.

Sets digital out audio type.

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. Satellite: Searches and stores satellite stations.

This feature can be used for direct broadcast entry.

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial

network channels. D. Cable: Searches for cable network channels. Satellite: Searches

for satellite network channels.

You can use this setting for fine tuning analogue channels. This feature is not available

if no analogue channels are stored and if currently watched channel is not an analogue

channel.

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan. Satellite Channel Table:

You can upload or download satellite channel table data using the related options.

Displays installation settings menu. Standby Search (*): Your TV will search for new or

missing channels while in standby. Any new found broadcasts will be shown. Dynamic

Channel Update(*): If this option is set as Enabled, the changes on the broadcasts

such as frequency, channel name, subtitle language etc., will be applied automatically

while watching.

(*) Availability depends on model.

Using this menu, you can edit the main and backup home transponder parameters,

including the Pid of the related M7 operator, which are used to download the channel

list. Set your preferences and press the Green button to save the settings. Then start

an M7 operator installation using the Automatic channel scan>Satellite menu.

(*) This menu option will only be available if an M7 operator installation is performed.

Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

English - 17 -