Epson PowerLite Home Cinema 730HD Quick Setup - Page 2

Browse online or download pdf Quick Setup for Software Epson PowerLite Home Cinema 730HD. Epson PowerLite Home Cinema 730HD 4 pages. Quick setup and warranty

Epson PowerLite Home Cinema 730HD Quick Setup
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit the
menu system.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the tips in "Troubleshooting".
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
one side of the screen at an angle. Place the projector directly in front of
the center of the screen, facing the screen squarely. Or use the horizontal
keystone slider on the projector to correct it.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct this.
or
, you've placed the projector off to
or
or
buttons on the projector to

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
Make sure the Status light on the projector is blue and not flashing,
and the A/V Mute slide is open.
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
If you're using a Windows
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
,
If you're using a Mac laptop, open System Preferences and select
Displays. Select the VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab, and select the Mirror
Displays check box.
Choose which source
to display
Navigate projector
menus
Get solutions to
common problems
laptop, press the function key on your
®
. You may have to hold down the