Epson SpectroProofer Mounter 44 User Manual - Page 6
Browse online or download pdf User Manual for Software Epson SpectroProofer Mounter 44. Epson SpectroProofer Mounter 44 29 pages. Ver.4.40
Also for Epson SpectroProofer Mounter 44: Operation Manual (47 pages)
Print Page
SpectroProofer Mounter 24"/44"
Mounter (Bottom Face)
1. Color Measurement Device carriage
Moves ILS20EP/ILS20EPUV between right and
left.
2. Mini USB interface cable
Receives data from ILS20EP/ILS20EPUV.
3. DC cable
Supplies power to ILS20EP/ILS20EPUV.
4. Paper Presser
Holds the paper during measuring color.
5. AC inlet
Plug the power cord here.
User's Guide
Introduction
Accessories
1. White calibration tile holder
Holds the white calibration tile.
2. Backing
The backing are plates placed underneath the
paper during color-measuring. Attach either
black or white backing to the printer.
Note:
The SpectroProofer Mounter 44" comes with two each
of black and white plates. The SpectroProofer
Mounter 24" comes with one each of black and white
plates.
3. Mounting guide
The guide for attaching the mounter to the
printer.
4. Clamp
Attach the clamp on the stand of the printer to fix
the printer connection cable and power cord.
5. Hex socket head bolts
Fix the mounting guide to the printer using the
hex socket head bolts.
6. Hex wrench
The tool used when the hex socket head bolts are
installed.
7. Printer connection cable
This cable is used when connecting the mounter
to the printer.
8. Power cord
This cord is used when connecting the mounter to
the AC inlet.
6