Epson Stylus Pro 10000 Series Product Information - Page 15

Browse online or download pdf Product Information for Software Epson Stylus Pro 10000 Series. Epson Stylus Pro 10000 Series 16 pages. Auto take-up reel unit
Also for Epson Stylus Pro 10000 Series: Specifications (6 pages), Installation Manual (26 pages), Quick Installation Manual (34 pages), Quick Reference Manual (12 pages), Warranty (28 pages), Quick Reference Manual (12 pages), Specifications (4 pages), Specifications (1 pages), Assembly Manual (12 pages), User Manual (13 pages)

Print Page

Replacing the Waste Ink System

About every two years of normal usage (25% duty cycle) or

after 12,000 B1-size prints, you must have your authorized

EPSON servicer replace the waste ink system. This is

necessary to prevent damage to the print head and maintain

print quality. Parts and labor for this service are not covered

under the terms of the limited warranty.

You can monitor the status of the waste ink system using the

control panel or by checking the Ink Pad number displayed on

the nozzle check print.

The printer displays the following message on the control

panel when the waste ink system is almost full:

MAINTENANCE REQ. 0100

You should call to schedule service at this point. When the

waste ink system is at full capacity, the printer stops and

displays the following message:

SERVICE REQ. 00000100