Epson Stylus Pro 10000 Series Quick Installation Manual - Page 9

Browse online or download pdf Quick Installation Manual for Software Epson Stylus Pro 10000 Series. Epson Stylus Pro 10000 Series 34 pages. Auto take-up reel unit
Also for Epson Stylus Pro 10000 Series: Specifications (6 pages), Product Information (16 pages), Installation Manual (26 pages), Quick Reference Manual (12 pages), Warranty (28 pages), Quick Reference Manual (12 pages), Specifications (4 pages), Specifications (1 pages), Assembly Manual (12 pages), User Manual (13 pages)

Epson Stylus Pro 10000 Series Quick Installation Manual

Installing the Server Software

Follow the instructions in this section to install the software on the server.
They describe how to:
Assign a static IP address (see below)
Name the server (see page 6)
Install the Fiery Spark Server software (see page 6)
Connect the hardware key (page 7)
Install Command WorkStation
Install ColorWise Pro Tools (optional, see page 11)
Before you begin, make sure you have:
Installed the EPSON printer driver (see your EPSON printer
documentation for instructions)
Connected the printer to the server using the USB interface (Stylus Pro
7600 and 9600) or the FireWire IEEE 1394 interface (Stylus Pro 10000
and 10600)
Closed all open programs and turned off any virus protection programs

Assigning a Static IP Address

1. Right-click
My Network Places
2. Select
Properties
3. Right-click
Local Area Connection
4. Select
Properties
5. Double-click
If the server is using a DHCP connection, skip ahead to "Naming the
Server" on page 6.
.
.
Internet Protocol (TCP/IP
Assigning a Static IP Address
(see page 8)
.
.
).
|
5