A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
buttons on the left side of the TV may be used for some functions.
Switching on
If the standby LED is unlit, check that the mains plug is con-
nected to the power and press the
side of the television to switch the television on. Then the
LED lights up. If the picture does not appear, press
the remote control; it may take a few moments.
To put the television into Standby, press
control. To view the television, press
may take a few seconds to appear.
Note: The active Standby LED may appear for a few moments
when the TV is switched off.
For energy saving:
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This
is recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy effi ciency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode, will reduce
energy consumption, but will still draw some power.
32BV501B_MB60_[GB]_(IB_INTERNET)_DVB-T_(3910uk)_10072937_10074859.indd 19
32BV501B_MB60_[GB]_(IB_INTERNET)_DVB-T_(3910uk)_10072937_10074859.indd 19
Controlling the TV
Press the MENU button on the remote control to see the
menus.
button on the left
The main menu appears as a group of icons each for a menu
option. Press the
on
OK button.
In sub menu screen mode the menu appears as a list. Press
on the remote
the
or
again. The picture
To use the options press the
control to move up and down through them and OK,
buttons to select the required choice. Follow the on screen
instructions. The functions of each menu are described in
detail throughout the manual.
Using the control buttons of the TV
• To alter the volume press +
• To alter the programme position press - P/CH + on the right
side of the TV.
• Press +
use - P/CH + to navigate and +
NOTE: The USB socket has limited functionality, and Toshiba
can take no responsibility for damage to other connected
equipment.
Please always refer to the owner's manual of the equipment
to be connected for full details.
- 19 -
Using the Remote Control
or
button to select a topic, and press
button to select a topic, and press OK button.
and
buttons on the remote
-.
- buttons at the same to view main menu and
- to change value.
or
03.10.2011 18:46:03
03.10.2011 18:46:03
Print Page