Toshiba DIGITAL Series Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for All in One Printer Toshiba DIGITAL Series. Toshiba DIGITAL Series 50 pages. Split type
Also for Toshiba DIGITAL Series: Owner's Manual (48 pages), User Manual (45 pages), User Manual (49 pages), User Manual (48 pages), Owner's Manual (4 pages), Owner's Manual (41 pages), Owner's Manual (22 pages), Installation Notes (4 pages)

Print Page

Connecting an HDMI® or DVI Device to the HDMI Input

The HDMI input on your television receives digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital

form from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI ter-

minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo (

• If your HDMI connection is capable of 1080p and/or

your television is capable of refresh rates greater than 50Hz,

you will need a Category 2 cable. Conventional HDMI/DVI

cable may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press the SOURCE button

to select HDMI1, HDMI2, HDMI3 or HDMI4.

40BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 15

Connect an HDMI-to-DVI adaptor cable (HDMI type A con-

nector) to the HDMI terminal and audio cables to the AUDIO

INPUTS (back) (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

•

An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

television ﬁ rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device ﬁ rst, and then the television.

- 15 -

21.01.2012 18:06:17