Toshiba DIGITAL Series Installation Notes - Page 2

Browse online or download pdf Installation Notes for All in One Printer Toshiba DIGITAL Series. Toshiba DIGITAL Series 4 pages. Split type
Also for Toshiba DIGITAL Series: Owner's Manual (48 pages), User Manual (45 pages), User Manual (49 pages), Owner's Manual (50 pages), User Manual (48 pages), Owner's Manual (4 pages), Owner's Manual (41 pages), Owner's Manual (22 pages)

Print Page
Toshiba DIGITAL Series Installation Notes
Logical Drive
HDD2187
No. of Cylinders (user)
Bytes per Sector
LBA Sectors
Buffer Size (KBYTES)
Rotation Speed (±.1%)
Transfer Rate
Internal (MBITS/sec.)
No. of Cylinders
(logical)
No. of Heads
No. of sec./Track
PIO/Ultra DMA (MBITS/sec.)
Seek Time (MSEC.)
Average
Track-to-track
Maximum
UNPACKING PROCEDURE
Visually inspect the shipping container prior to unpacking for any signs of damage
to the container or its contents (the carrier is responsible for any damage incurred
during shipment). The drive is a precision device and even a small drop onto any
surface can cause damage. Prior to opening the anti-static bag, it is recommended
that the user ground himself with a ground strap or by touching the PC chassis or
other metal object. Remove the drive from the anti-static bag and check it for
damage. Place the drive on the anti-static bag while configuring jumpers to avoid
any electrostatic discharge. Save the shipping container and packing material for
possible use later.
DRIVE CONFIGURATION
Toshiba's 2.5" hard disk drives can be configured as either master or slave units.
Master configuration is used for all single drive applications, and master or slave
configuration (only one of each per port) is used for two drive applications. Use the
information in the following table before setting M/S drive.
Master configuration is obtained by setting jumpers B, C & D open (no jumper).
Slave configuration is obtained by setting jumpers C-D. When B-D jumper is in-
stalled, the drive is configured as cable select. If pin 28 = Low, the drive is master.
If pin 28 = High, the drive is slave.
2.5" Hard Disk Drive Installation Notes - 9.5mm GAS Series
MK8025
MK6025
GAS
GAS
HDD2188
HDD2189
54,000
42,480
512
512
156,301,488 117,210,240
8,192
8,192
4200
4200
175.0 –
201.6 –
341.7
307.5
16,383
16,383
16
63
16.6/100
16.1
12
2
22
MK4025
GAS
HDD2190
54,000
512
78,140,160
8,192
4,200
175.0 –
341.7
16,383
16
16
63
63
16.6/100
12
12
2
2
22
22
MK3025
GAS
HDD2196
42,480
512
58,605,120
8192
4,200
201.6 –
307.5
16,393
16
63
16.6/100
12
2
22
P/N 480056-F0
08/04