Toshiba e-studio 2309a Software Installation Manual - Page 39
Browse online or download pdf Software Installation Manual for All in One Printer Toshiba e-studio 2309a. Toshiba e-studio 2309a 48 pages.
Print Page
4.INSTALLATION IN UNIX/Linux
Configuring the printer for IPP printing
When you want to set up an IPP print queue in the Linux OS, follow the procedures here.
1
Insert the Install Disc into the disc drive.
2
Log on to the root account.
3
Install the RPM package with the rpm command.
4
Enter the following command:
service cups start
If the CUPS has already been started, stop the CUPS service once by entering "service cups stop"
command, and then enter the above command to restart the CUPS service.
5
Open the browser and locate CUPS by typing "http://localhost:631/" in the address
box.
When you use Red Had Linux, enter the following command to access "Common UNIX Printing
System" page.
/usr/bin/cupsconfig
6
Click [Add Printer] on the [Administration] tab.
7
Select "Internet Printing Protocol (http)" and click [Continue].
8
Enter "http://<IP address>:631/Print" in the [Connection] box and click [Continue].
9
Enter the printer name, description, and location of the printer in each box, and click
[Continue].
If a new printer name is a duplicate of a name already in the printer list, the new printer will replace
the original printer.
10
Select [Toshiba] in the [Make] box and click [Continue].
11
Select the model name in the [Model] box and click [Add Printer].
12
Confirm that the message notifying that the new printer has been properly added
appears.
13
Go to the following page for configuring the print options:
P.39 "Configuring the print options"
4 INSTALLATION IN UNIX/Linux
Configuring the Printer Using CUPS
37