Epson Stylus Pro 5500 Product Support Bulletin - Page 43

Browse online or download pdf Product Support Bulletin for Software Epson Stylus Pro 5500. Epson Stylus Pro 5500 44 pages. Product support bulletin
Also for Epson Stylus Pro 5500: Specifications (14 pages), Specifications (2 pages), Installation Manual (26 pages), Limited Warranty (8 pages), Supplementary Manual (4 pages)

Print Page

Stylus Pro 10600 UC PSB.2002.09.002A

Drying

Time:

The default is

*0.0

Sec. Setting a Dry Time is useful if the printer pauses during a print waiting for more data to

print from the computer. Ideally the print head of the printer should continue moving consistently from start to finish

when printing an image. If the print head paused waiting for more data the ink it has already laid down dries, then

when more data arrives the printing continues however the new wetter ink cannot blend with the already dried ink

causing a

Wide Horizontal Band

consistently is to add a Dry Time or delay between each print head pass this will cause each layer of ink the same

amount of time to dry and eliminate the wide horizontal bands in the images. The other solution is a faster com-

puter.

(Range 0.0 Sec. -

7. Suction:

The default is *Normal. The normal setting is the best selection for most media however if you are using thin or

very thin media you may want to try the optional settings of Weak or Weakest.

Adjustment:

The default is *5. This selection allows you to adjust the MicroWeave pattern. MicroWeave is the pattern of dots

the print head lays down. By adjusting this value a more uniform image can be produced and can also reduce or

remove minor banding.

Keep a record of your custom paper configurations that includes the paper number, media type

TIP

and your custom setting values.

Printer Control Panel Paper Configuration

in the image. One solution to a computer that cannot keep the printer running

10.0Sec).

(Range 1 -

9).

(Range Weak and

Weakest).

10/22/03

Page 6.